Safety Helmet Electrical Insulation Tester
Product Introduction:
Safety hat electrical insulation performance tester used to test the electrical insulation performance of safety hat, high degree of automation, easy to operate, widely used in safety hat manufacturers and major quality inspection units.
Meet the standard:
GB/T2812-2006 Safety helmet test method
GB/T2811-2007 Safety helmet
Product Advantages:
Measures Critical Safety Property: Quantifies the electrical insulation capability of safety helmets, essential for protecting wearers from electrical hazards.
Standard Compliant: Designed to meet relevant national standards (GB/T 2812. GB/T 2811) for safety helmet electrical testing.
High Automation: Features a high degree of automation, making the test process more efficient, consistent, and easier for the operator.
Objective Quantitative Results: Provides digital readouts of current and voltage with specified accuracy.
Plastic Sink: Eliminates potential issues related to the conductivity of the test sink, ensuring accurate measurements.
Configurable Test Head: Allows customization of the test electrode to accommodate different helmet types or test needs.
Widely Used: Adopted by manufacturers and testing laboratories in the safety helmet industry.
Product Features:
Plastic sink or water bath system designed to contain water and accommodate the safety helmet for testing in a wet condition, without interfering with electrical measurements.
Electrodes for applying high voltage to the safety helmet, including a probe with a specific diameter (4mm) and hemispherical top.
LED digital display providing real-time readouts of current and voltage values during the test.
Capability to apply high voltage according to a specific sequence: increasing the voltage to 1200V ± 25V within 1 minute and maintaining it for 15 seconds.
Voltage regulator with a range of 1500V to control the applied voltage.
Built-in timer to control the duration of the high-voltage application, with a specified error ($pm$1%).
Accurate measurement of current and voltage, with expression value errors of $pm$1%.
Configurable test head die or electrode to meet various helmet testing requirements.
High level of automation for the test procedure.
Safety features (implied for high voltage testing) to protect the operator.
Technical features:
1. plastic sink, to solve the conductive stainless steel and metal sinks and other problems
2. LED digital display current, voltage value
3. Electrical insulation test head die can be configured according to customer requirements
Technical parameters:
1. the current expression value error of ±1%
2. voltage value error ±1%
3. timer value error ±1%
4. the diameter of the probe is 4mm, the top is hemispherical
5. The voltage is increased to 1200V±25V within 1min and maintained for 15s
6. voltage regulator: range 1500V
在线联系供应商
Other supplier products
 |
Air-cooled Xenon Lamp Aging Tester | Standard Compliance AATCC TM16-2004 Colorfastness to Light AATCC TM16.3 Colorfastness to Light ASTM D2565 Standard Practice for Xenon Arc Expo... |
 |
Thermal and Water-vapour Resistance Tester-QINSUN | Introduction TheThermal and Water-vapour Resistance Testeris a special measurement device used for measurement of thermal and water-vapour resista... |
 |
Melt wire drawing apparatus | Product Introduction: Melt wire drawing instrument is specially designed for the production of rubber and plastic raw material filamentary sample,... |
 |
Automatic Wire Stripping Machines | Product Introduction Automobile wire cutting tester is the main instrument for testing the insulation strength of automobile wire, and it is the... |
 |
Car seat headrest insertion and withdrawal force durability tester | Applicable standards: GB 11550-2009 "Automobile seat headrest strength requirements and test methods" : This standard specifies the test methods... |
Same products
 |
Air Intake Filter Test System | 卖方: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | 卖方: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | 卖方: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | 卖方: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
