Film impact tester
Product Introduction
The film impact testing machine, through the hemispherical punch at a certain speed, impacts and passes through the film sample, measures the energy consumed by the punch, and evaluates the anti-pendulum impact energy of the film sample.
The sample to be measured is placed in the middle of two splints to clamp, and the pendulum is adjusted by counterweight to form enough mechanical energy to impact the surface of the sample to be measured during the impact process to break down or not break down the sample to be measured. The energy borne by the sample to be measured is the loss part of the total mechanical energy formed by the pendulum during the impact process, and is read out on the dial through the pointer.
standards
ASTMD3420-2014、GB8809-2015、GB/T 20624.1—2006/ISO 6272-1:2002、ASTM D2794—2019;
Performance parameters
- Full range of dial: 3J/(30cm.kgf)
- Maximum impact energy: 3J
- Hammer diameter: Φ25.4mm: suitable for test specimens with diameter of medium 50-60 (Class A test in the standard); Φ19mm: Suitable for testing specimens with a diameter of 89 (Class B test in the standard)
- Reading dial minimum scale value: 0.020J/ grid (0.20cm.kgf)
- Specimen clamp diameter: Φ89mm, Φ60mm
- Swing range: R300mm
- Swing Angle: 90°
在线联系供应商
Other supplier products
 |
EN sole bending tester | Product Introduction: The EN sole bending tester is used for 90 degree bending test of the sole of rubber, EVA and other zigzag shoes to detect it... |
 |
Nissan 4-Station Abrasion Tester for Multi-Material Durability Tester-QINSUN | Standard ASTM D3884(Standard Guide for Abrasion Resistance of Textile Fabrics) ISO 5470-1(Rubber- or Plastics-Coated Fabrics - Abrasion Resistanc... |
 |
Parts Valves Tube Cleaning | A robot system to clean parts, valves and tubes. By high pressure water tools together the intelligent programming, the system can make the clean ... |
 |
Film punching machine | Meet the standard: GB/T1528; GB/T529; GB/T8083; GB/T 15340.ASTM Technical parameters: Travel range :100mm Blanking force: about 20kN Table s... |
 |
Car seat component clearance test bench | Applicable standards: Car seat component clearance test benches usually follow the following domestic and international standards: QC/T 805-200... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
