.

Qinsun UV-master

In response to the climate resistance testing requirements for outdoor textiles, this equipment can simulate outdoor climate conditions and accelerate testing. Textiles may undergo yellowing, decline, and structural changes under the stimulation of outdoor ultraviolet radiation.

UV testing is conducted by exposing materials to high temperature control conditions and alternating cycles of ultraviolet light exposure and humidity UV uses fluorescent ultraviolet lamps to simulate sunlight, and simulates dew and rainwater through condensation or water spraying. The aging types of textiles include discoloration, loss of luster, powdering, cracking, foaming, brittleness,decline, oxidation, etc

Standards:

ASTM G151 ASTM D4329 D4329 ASTM-D4587.ASTM-G154

Technical parameters:

1. Blackboard temperature setting range:BPT 40-110 ℃; BST 40-120 ℃, but the actual temperature limit of the temperature protection device inside the machine is93 ℃± 10%.

Blackboard temperature control accuracy:± 2 ℃.Blackboard temperature sensors are consumables that require frequent wiping. The surface paint may peel off after a certain period of time, affecting the control accuracy. Therefore, if there is a significant change in color, it needs to be replaced. The specific time depends on the usage situation, usually around two years.

2. Sample size: 48 standard samples of75 * 150mmcan be placed;

3. Sample thickness: The sample thickness shall not exceed 10mm

4. UV wavelength:UVA-340

5. Simulated condensation: The condensation system time can be adjusted

6. Test time: adjustable from0 to 9999

7. Irradiance: adjustable from0 to 1.6w/m2

8. Test time: It can continuously accumulate test time without resetting due to power outages or other factors

9. Irradiance calibration: The irradiance can be calibrated at any point within the set range without changing the program being executed

10. Calibration process: The calibration process achieves automatic input correction to avoid errors caused by manual input

11. UV state, no water, operable

12. Sample space: Large sample space, can be equipped with 3D sample racks

13. Experimental status data can be transmitted through Ethernet cables

14. Lamp lifespan: UV lamp lifespan can reach over 5000 hours

15. Compliant with standards:ASTM G151 ASTM D4329 D4329 ASTM-D4587.ASTM-G154

Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Flame retardant paper and board burning tester
Flame retardant paper and board burning tester Technical parameters: 1. Ambient temperature :-10℃——30℃ 2. Relative humidity :{<}85% 3. Power supply voltage and power :220V 10% ...
AC/DC High - Voltage Testing Machine for Automotive Wires
AC/DC High - Voltage Testing Machine for Automotive Wires The AC/DC high - voltage tester for automotive wires is specially used to test the insulation between wire cores or between wire cores and outer ...
Fogging Tester
Fogging Tester Standards DIN 75201: Automotive trim material fogging resistance. ISO 6452: Coated fabrics fogging behavior in vehicle interiors. SAE J1756: A...
High - voltage DC Stability Tester
High - voltage DC Stability Tester The high - voltage DC stability tester is suitable for testing DC high - voltage within the range of 0.1 - 5.00KV and continuously recording the ...
45 Degree Flammability Tester
45 Degree Flammability Tester Standard ASTM D1230: Flammability of Apparel Textiles (45° Inclined Method) CFR 16 Part 1610: Flammability of Clothing Textiles (Federal St...
供应产品

Same products

Laser Cutting Machines
Laser Cutting Machines 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ...
Precision Laser Micromachining Machine
Precision Laser Micromachining Machine 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ...
Ultrafast Laser Systems
Ultrafast Laser Systems 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi...
Industrial Laser Equipment Manufacturer
Industrial Laser Equipment Manufacturer 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan...
Common Rail Injector Valve F00R J02 012
Common Rail Injector Valve F00R J02 012 卖方: 868983 Common Rail Injector Valve F00R J02 012 David Chen