Sand and Dust Test Chamber for Automotive Connectors
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Operating Conditions:
Ambient temperature: 5°C～+28°C (average temperature within 24 hours ≤28°C); Ambient humidity: ≤85%
Technical Parameters:
1. Nominal spacing of the metal mesh is 50μm, and the nominal spacing between wires is 70μm
2. Airflow velocity: ≤2m/s (standard type) or ≥2m/s (specify when placing an order) 3. Continuous or periodic dust - blowing can be freely selected, or time can be set 4. Talcum powder dosage: 2kg - 4kg/㎡ 5. Dust for testing: Dry talcum powder, portland cement, soot, etc. 6. Vibration time: adjustable from 0 to 9999 minutes (M represents minutes) 7. Fan cycle time: 0 to 9999 minutes (M represents minutes) 8. Standard configuration: The sand and dust testing equipment is equipped with 2 specimen racks and 2kg of talcum powder 9. Power requirements: AC380(±10%)V/50HZ, three - phase five - wire
Product Applications:
This equipment is suitable for dust - proof and dust - resistance tests of various automotive components, including vehicle lamps, instruments, electrical dust - proof sleeves, steering systems, door locks, etc., to verify the sealing quality of products.
Structural Features:
1. Material of the chamber outer shell: High - quality carbon steel plate, with phosphating and electrostatic powder spraying on the surface, and hairline treatment for SUS304 stainless - steel strips; 2. Inner liner material: Imported SUS stainless - steel polished plate; 3. Chamber door: Tempered glass door, facilitating the observation of the tested samples inside the test chamber; 4. High - quality fixed PU casters are used at the bottom; 5. There is a dust - replacement device at the bottom of the test chamber;
System Structure:
1. Control system: The sand and dust testing equipment is controlled by a programmable logic PLC controller to manage the time and sequence of the dust - blowing, vibration and vacuum systems 2. Actuating components: "Schneider" AC contactors, switches, buttons; "Fuji" intermediate relays; "Panasonic" dust - proof sockets 3. Dust pre - heating system: Stainless - steel mica heating jacket, with stable and safe heat; it has timer - controlled heating; Vacuum system: Equipped with a pressure gauge, air filter, pressure - regulating triple unit and connecting pipes (the vacuum pump is provided separately, please specify when placing an order) 4. Power socket for test specimens: Dust - proof socket, AC220V 16A 5. Circulating fan: Low - noise motor with a multi - blade centrifugal impeller 6. Protection system: With protection functions against electric leakage, short - circuit, over - temperature, motor overheating, over - current / power - off memory protection for the controller
在线联系供应商
Other supplier products
 |
Ozone Test Chamber | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Ozone testing laboratories have wide applications in various fields, including but... |
 |
Gravel Resistant Impact Tester/Stone chip tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Gravel Resistant Impact Tester/Stone Chip Tester T201 is specifically designed... |
 |
Aviation Propulsion Fuel Test System | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Aviation Propulsion Fuel Test System is suitable for a wide range of aerospace... |
 |
Taber oscillation and wear instrument | Taber oscillation and wear instrumentis used to test the transparency of materials and coatings on glass, lenses, and to evaluate the abrasion resi... |
 |
UV Protection Performance Tester AATCC 183 | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Textile UV Protection Performance Tester is used to evaluate the ability of textil... |
Same products
 |
Metal Angular Fixator Testing Machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Angular Fixator Testing Machine... |
 |
Bone Plate Four-Point Bending Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plate Four-Point Bending Fatigue... |
 |
Bone Plates Static Four - point Bending Tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plates Static Four-Point Bending... |
 |
Spinal Internal Fixation System Assembly Testing Machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Assem... |
 |
Spinal Internal Fixation System Component Testing Machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Compo... |
