.

Textile water evaporation rate tester

Standard:

The design and operation of this tester are aligned with key international and national standards related to assessing the moisture management and drying characteristics of textiles, including:

AATCC Test Method 201

AATCC Test Method 199

AATCC Test Method 200

ASTM E96

Product Advantages:

This Textile Water Evaporation Rate Tester offers significant advantages for laboratories and manufacturers focused on textile performance:

Objective Performance Evaluation: Provides a quantitative and repeatable method for assessing quick-drying, eliminating subjective evaluations.

Simulates Real-World Conditions: Can simulate conditions similar to those experienced when moisture evaporates from fabric in contact with the skin or in specific environmental conditions.

High Accuracy and Repeatability: Utilizes precise measurement systems (e.g., sensitive balance, controlled environment) to ensure reliable and consistent test results.

Efficient Testing: Allows for relatively quick determination of drying rates compared to some other methods.

Data Analysis Capabilities: Often paired with software for real-time data acquisition, visualization of drying curves, and comprehensive report generation.

Scope of Application:

This instrument is used for testing and evaluating the moisture absorption and quick-drying performance of various textiles. The quick-drying property of textiles is assessed by measuring the rate of water evaporation.

Technical Parameters:

Sensor Accuracy 0.001g
Sample Weight < 100g
Sample Weighing Interval ≥1 minute
Applicable Sample Size 100mm × 100mm
Power Supply and Power AC220V ± 10V, 50Hz, 200W
Instrument Dimensions (L×W×H) 500 × 450 × 665mm
Instrument Weight 40kg
Number of Workstations 6 workstations (6 motors independently controlled)
Control Mode Computer software upper computer control

Instrument Features:

  • Equipped with imported high-precision balance, accuracy 0.001g.
  • Institutional self-locking function to prevent accidents after sudden power failure, ensuring safer use.
  • Uses high-quality drive motors for smooth operation and low noise.
  • Optimized structural design for precise positioning.
  • Can test up to 6 workstations simultaneously or select the number of workstations as needed.
  • Flexibly set the weighing interval time for experiments.
  • Test termination condition: evaporation rate change does not exceed 1%.
  • Automatically generates test result curves.
  • Automatically calculates evaporation rate, ensuring accurate test data.

在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Seat Belt Abrasion Tester-QINSUN
Seat Belt Abrasion Tester-QINSUN Standard: ISO 10555(Seat Belt Assemblies - Test Methods for Abrasion Resistance) ECE R16(Uniform Provisions Concerning the Approval of Safety B...
 Geomembrane Hydrostatic and Permeability Tester
Geomembrane Hydrostatic and Permeability Tester Scope of application: It is used to test the hydrostatic pressure resistance and permeability coefficient of nonwoven composite geotextile (one cl...
Computer controlled foam universal testing machine
Computer controlled foam universal testing machine Product Introduction 1. Meet the standard "GB/6344-2018 soft foam polymer tensile strength and elongation at break determination, GB/T6669-2008 ...
Qinsun Ci xenon lamp aging test chamber
Qinsun Ci xenon lamp aging test chamber The Ci Series Weather-Ometers are the most widely used rotating rack water-cooled xenon-arc weathering testing instruments in the world. Their larg...
Paper smoothness tester
Paper smoothness tester Implementation standards: ISO 5627 Paper and board - Determination of smoothness (Buick method) GB/T 456 "Paper and board smoothness determinatio...
供应产品

Same products

不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 卖方: 863048 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1,FCAW不锈钢焊丝,AWS A5.22药芯焊丝,304不锈钢焊接耗材,低碳不锈钢药芯焊丝,耐高温不锈钢焊丝,...
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 卖方: 863048 迅卓不锈钢药心焊丝 E317LT1-1 分类: Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан...
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding 卖方: Beijing JCZ Technology Co., Ltd The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre...
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal 卖方: Beijing JCZ Technology Co., Ltd TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig...
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner 卖方: Beijing JCZ Technology Co., Ltd The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las...