contact heating and cooling tester
Product Introduction:
When the skin is in contact with the fabric, the "warm" and "cold" sensation felt by the skin is called "contact cold and heat sensation". Depending on the amount of heat transferred from the skin to the fabric, the perception of heat and cold is also different.
The device is a tester for measuring "q max" （peak heat flow）， an index for evaluating cold and heat sensation.
Used to evaluate cool and cold pajama bedding fabrics for summer and underwear fabrics with heat contact for winter.
Features:
· Design to mimic the feeling of human body touching objects
The load and contact area of the hot plate in contact with the measurement sample are designed to simulate the feeling of the human body touching the object, so that the maximum heat movement can be measured more accurately.
· Thermal conductivity/insulation can also be measured （optional）
Thermal conductivity: Based on a fixed thermal conductivity measurement, the heat transfer performance between a hot plate at a fixed temperature （30°C） and another hot plate at a fixed temperature （20 ° C） is measured from a sample.
Insulation :（optional）
The sample is placed on a hot plate set at a fixed temperature （room temperature +10）， in contact with air, and the sample surface is blown at a fixed wind speed. At this time, the heat lost by the sample was calculated, and the insulation rate was calculated
（%）。 The measurement methods include the dry method, which assumes direct contact between skin and clothing in a dry state, and the wet method, which assumes sweating.
在线联系供应商
Other supplier products
 |
Fabric Downproof Tester(Rolling Box) - Test Equipment | Standards GB/T 12705.1:Textile -Methods of testing the down-proof properties of fabrics- Part 1: Rubbing test; GB/T 14272：Requirements of down ga... |
 |
Surgical Mask Flame Retardant Tester | Application The Surgical Mask Flame Retardant Tester is applicable to flame-retardancy evaluation across the following industries and products: (... |
 |
Leather Shoe Hook Core Longitudinal Bending Stiffness Tester | Application: Shanks Longitidinal Stiffness Tester determines the stiffness in the longitudinal direction of steel shanks used for the reinforcemen... |
 |
Filter Media Test System - lab instrument | The Filter Media Dynamic Filtration Performance Testeris mainly used to test the filtration performance of filter materials. The equipment itself i... |
 |
Taber Type Abrasion Tester | TheAlcohol abrasion resistance testercomplies withUL817 and other relevant standards "special rubber fixed to the machine friction rub hammer surfa... |
Same products
 |
Blanket Flammability Test Machine | 卖方: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | 卖方: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | 卖方: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | 卖方: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | 卖方: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
