Room Corner Tester
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Email: serving@qinsun-lab。com
According to ISO9705 of building materials fire prevention performance standards, this machine control platform to provide independent gas analysis, including heat release rate and other related test required for related instruments, such as paramagnetic oxygen sensor, CO2/CO measuring instrument, He-Ni laser smoke density measurement and control system, etc.
Entity room fire test methods forsurfaceof the article use the same principle with the cone calorimeter and SBI testmethod thatis based on the oxygen consumption. The method is to simulate the corner of the fire scene as a standard testconditions, and installation of a test sample entirely according to actual use, the test results apply only to specific sample installation, it is one of the most reliable standard test methods. In the corner fire test, in accordance with the requirements of ISO9705. and the measured material mounted on the inner walls of the room (at the top is not installed), Using propane burners as a radiation source, the measurement of heat release rate, temperature, heat release, flashover time, CO2 /CO and other parameters, for which the most important is the heat release rate and the flashover time.
Standards
• ISO 9705: LargeBOXtest surface of the product
• ISO 13784-1: plywood building systems Reaction to fire test
• ASTM E 1537: Standard upholstered furniture flame test method
• ASTM E 603: Standard guidance corner combustion experiments
Main Features
1. The test room is built by the density of 700kg / m³-A1 class fireproof material.
2. The internal dimensions of the room 3.6M X 2.4M X 2.4M
3. The gate size: 0.8M (W) X2.0M (H)
4. Sandbox burner with propane gas and equipped with emergency shut-off devices.
5. Automatic ignition system to automatically record experimental data;
6. Independently movabletimetto display units.
7. 10kV spark ignition, a cease-fire with safety devices. Fire extinguishing drainage system design.
9. Equipped withstaircasefor easy maintenance exhaust pipes.
Gas sampling and analysis system
1. Gas sampling system includes an annular sampler probe, suction pump, particulate filter, a cold trap, exhaust valve, water filters and CO2 filter.
2. Three filters; Minimum filtration accuracy is 0.5um.
3. Freezing cold trap; air-conditioning compressor refrigeration systems; controlling the temperature in 0 ~ 5ºC.
4. Suction pump,Flowrate is 33L/min,vacuumis 700mmHg, and pressure is 2.5 bar.
5. Drying cylinder, whichfilterthe water and impurities.
6. The flow controller to control the inspiratoryair flow.
7. The sampler has 12 holes and gas flow in the opposite direction, these holds built-in dust filter and 685mm from hoods.
8. Paramagnetic oxygen analyzer, the range is 0-25%; linear response; imports Britain Servomex oxygen sensor.
在线联系供应商
Other supplier products
 |
Cone calorimetric test equipment| Testing Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Heat release is the core measurement parameter for assessing material and product ... |
 |
Moisture friction and wear testing machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The hydraulic plastic friction and wear testing machine meets the standard "GB/T39... |
 |
Safety Helmet Flammability Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Safety Helmet Flammability Tester is designed to evaluate the flame-retardant ... |
 |
Flammability test furnace for building materials | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Product Introduction: Touch screen control buildin... |
 |
Automotive Floor Mat Abrasion Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Automotive Floor Mat Abrasion Tester is designed for evaluating the abrasion r... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
