Room Corner Test Machine, ISO 9705. En 14390

According to ISO 9705 of building materials fire prevention performance standards, this machine control platform to provide independent gas analysis, including heat release rate and other related test required for related instruments, such as paramagnetic oxygen sensor, CO2/CO measuring instrument, He-Ni laser smoke density measurement and control system, etc.

Entity room fire test methods for surface of the article use the same principle with the cone calorimeter and SBI test method that is based on the oxygen consumption. The method is to simulate the corner of the fire scene as a standard test conditions, and installation of a test sample entirely according to actual use, the test results apply only to specific sample installation, it is one of the most reliable standard test methods. In the corner fire test, in accordance with the requirements of ISO 9705. and the measured material mounted on the inner walls of the room (at the top is not installed), Using propane burners as a radiation source, the measurement of heat release rate, temperature, heat release, flashover time, CO2 /CO and other parameters, for which the most important is the heat release rate and the flashover time.

Standards

• ISO 9705: Large BOX test surface of the product

• ISO 13784-1: plywood building systems Reaction to fire test

• ASTM E 1537: Standard upholstered furniture flame test method

• ASTM E 603: Standard guidance corner combustion experiments

Main Features:

1. The test room is built by the density of 700kg / m³-A1 class fireproof material.

2. The internal dimensions of the room 3.6M X 2.4M X 2.4M

3. The gate size: 0.8M (W) X2.0M (H)

4. Sandbox burner with propane gas and equipped with emergency shut-off devices.

5. Automatic ignition system to automatically record experimental data;

6. Independently movable time to display units.

7. 10kV spark ignition, a cease-fire with safety devices. Fire extinguishing drainage system design.

9. Equipped with staircase for easy maintenance exhaust pipes.

Other supplier products

	Stone hammer blow testing instrument	Stone hammer blow testing instrument mainly simulates the actual driving condition of the vehicle, and the individual parts of the vehicle body are...
	Wool Fineness Analyzer - lab instrument	Wool fiber fineness value is measured by the airflow method. When exerting a certain pressure air to a certain amount of mass and volume of sample ...
	Water injection counterweight dummy - lab instrument	Product Introduction This counterweight dummy can be filled with water, the torso and the bottom are separated, independently filled with water o...
	Hexapod Tumbler test machine	Standard BSEN 1471:1997: Evaluation of Appearance Changes in Floor Coverings ISO 9405:2001: Floor Coverings – Determination of Appearance C...
	Rain Tester - Test Equipment	Standard AATCC 35: Water Resistance: Rain Test for Fabrics BS EN ISO 22958: Textiles – Determination of Resistance to Water Penetration &nd...

供应产品

Same products

	Blanket Flammability Test Machine	卖方: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	卖方: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	卖方: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	卖方: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	卖方: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...