Test for Flammability of Materials
Thistester is developed base on thestandard AS1530.2. test for flammability of materials. The method is applied to the testing of a thin sheet or woven material which is sufficiently pliable to be inserted into the test apparatus by hand withoutspecial softening treatment,
Standard
AS1530.2 Test for flammability of materials.
so that it may be graded according to a flammability index.
Apparatus
Two parallel brass rails, light gauge angle section which is formed in length to be slightly convex, with location pin;
All other frames made of stainless steel material;
A533.4mm scaler is fixed to one side of the mounting frame, with 21 equally space and 25.4mm apart;
Two stainless steel wire alone location pin with lightly tension to a held specimen in position;
Ignition copper trough, with an internal dimension of 20mmx10mmx3mm, with brass support, height-adjustable.
Stainless steel flue and hood;
4 thermocouple, type K, positioned symmetrically within the flue, 570mm above the test specimen;
1 thermocouple, type K, positioned in the control box, monitor ambient temperature;
Labview software with DAQ module for temperature record and the Area (A) calculation;
在线联系供应商
Other supplier products
 |
Fuel Cell Air Intake Filter Test System | The Fuel Cell Air Intake Filter Test System is designed to evaluate air intake filters for fuel cells, using both particle-based aerosols and test ... |
 |
Automatic Thermal Deformation Vicat Softening Point Tester | This machine is a non-metallic material testing instrument designed and manufactured according to the latest international standards and national s... |
 |
Automatic Long Filament Curl Shrinkage Tester | Application (1) Synthetic Fibers: Polyester, nylon, polypropylene, acrylic, and other long synthetic filaments. (2) Filament Yarns: Single filame... |
 |
Cone Calorimeter / Cone calorimetric test equipment | The Cone Calorimeter is a precision fire-testing instrument designed to evaluate material combustion behaviors based on oxygen-consumption calorime... |
 |
Akron Abrasion Tester | Testing Standards BS-903 Specification Specimen 63.5mm,X12.7mm X12.7mm L 220mm, hardness 60-70 Grinding Wheel D150mm,W25mm, ... |
