.

Fiber Oil Extractor - Test Equipment

Rapid Grease Extraction Apparatus

Testing Standards

Edana method ERT 155

Applications:

Rapid Grease Extraction Apparatus is designed to determine the grease or finish content of wool or synthetic samples by solvent percolation and evaporation. Suitable for fiber, yarn or fabric. Available with 1. 2 or 3 extraction units.

Product Information:

The Rapid Grease Extraction Apparatus was developed specifically for obtaining the oil content of tops and similar materials sufficiently quickly for the results to be available at the time of processing.

The principle of extraction is percolation of a solvent through the wool sample in a simple metal tube. The extract, as it drips from the tube, is collected by a light aluminium tray held between two metal rings mounted on a temperature-controlled hot-plate.

Features:

1.The instrument consists of pedestal, extraction tub, weight, plunger, cotton wool plug, tray, and the hot-plate.

2.The tube should be positioned in the hole in the lower support member of the apparatus, and the plunger boss placed in the hole in the upper support member.

3.In use the plunger is placed through the boss and down into the tube. The weight is then located on top of the plunger.

Testing Method:

Before starting a series of tests, the hot-plate is allowed to warm up to a suitable temperature (set by the power regulator knob). The correct temperature has been obtained when the solvent evaporates from the dish almost as quickly as fresh solution filters through to replace it. This prevents flooding of the tray and losing oil to the brass ring.

The temperature must not be too high, however, or the solvent will evaporate violently as the drops of solution hit the hot tray.

Before each test a pre-weighed aluminium tray is placed on the hot-plate brass ring. The tray location ring is then placed on the tray to secure it and to maintain a good thermal contact with the lower ring. The bottom of the tray must not touch the hot-plate.

This test method is most suitable for extracting loose wool or combed slivers, but it may also be used for yarn. It is not suitable for fabric unless it is first disintegrated into yarn to facilitate uniform packing in the extraction tube.

Technical Parameters

1.Range of temperature: ambient temperature-250℃;

2.Loading mode: aggravate weights;

3.Timing range: 1-9999min;

4.Accuracy of temperature control: ±1℃;

5.Number of specimens: 3;

6.Extracting solvent: Petroleum ether, ether and dichloromethane;

7.Outside dimension: 170×170×380mm(L×W×H);

8.Weight: 4.4kg(9.7lb);

9.Power supply: AC220V, 720W;

10.Power dissipation >: 175W.

Product Display


在线联系供应商

至: Standard Groups
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Carbon Arc Aging Chamber
Carbon Arc Aging Chamber The Carbon Arc Aging Chamber employs alternating current to ignite carbon rods, generating an arc light source. After passing through a filter, thi...
 Water injection counterweight dummy
Water injection counterweight dummy Standards Compliant GB/T 15089 — Classification of Motor Vehicles and Trailers GB/T 11551 — Seat Belt Anchorages Performance Test IS...
Automatic dry cleaning tester - lab instrument
Automatic dry cleaning tester - lab instrument The YG-6 Fully Automatic Dry Cleaning Tester is used to evaluate the physical properties of wool, fur, cotton-linen, worsted, and synthetic fabrics...
KM-5A Particle Abrasion Tester
KM-5A Particle Abrasion Tester The KM-5A particle attrition tester is specially designed according to the test method for the determination of catalyst attrition rate in my count...
Anti-drill tester (Friction method) - lab instrument
Anti-drill tester (Friction method) - lab instrument TheAnti-drill Tester (Friction Method)is a specialized instrument designed to evaluate the drill resistance of materials such as composites, polyme...
供应产品

Same products

Air Intake Filter Test System
Air Intake Filter Test System 卖方: Standard Groups The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
Mattress Spring Fatigue Tester,ASTM D3574 ,how to test mattress for sagging
Mattress Spring Fatigue Tester,ASTM D3574 ,how to test mattress for sagging 卖方: Standard International Group (HK) Limited The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
Mattress Rollator,ASTM F1566 ,Mattress Durability Tester,Mattress Fatigue Tester
Mattress Rollator,ASTM F1566 ,Mattress Durability Tester,Mattress Fatigue Tester 卖方: Standard International Group (HK) Limited The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
HD2 Pneumatic Foam Fatigue Tester,ISO 3385,Foam Fatigue Testing Machine
HD2 Pneumatic Foam Fatigue Tester,ISO 3385,Foam Fatigue Testing Machine 卖方: Standard International Group (HK) Limited The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
VW Heel Abrasion Tester,ISO 4649 ,Heel Performance Testing Machine
VW Heel Abrasion Tester,ISO 4649 ,Heel Performance Testing Machine 卖方: Standard International Group (HK) Limited The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...