Mechanical load testing machine for photovoltaic modules
The Mechanical Load Testing Machine for Photovoltaic Modules is engineered to evaluate the mechanical durability of both crystalline and thin-film PV modules under static and dynamic load conditions. By simulating snow, wind, hail, and debris impacts, the system ensures modules meet international mechanical reliability standards. It is suitable for R&D, quality assurance, and certification laboratories.
Application
Static and dynamic mechanical load testing of crystalline PV modules (framed/frameless).
Fatigue testing under pulsating wind or snow load conditions.
Hail and debris impact simulation for module safety evaluation.
Research and development for thin-film PV modules and flexible panels.
Standards
IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
IEC 61646: Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
IEC 62782: Dynamic Mechanical Load Testing for Photovoltaic Modules
UL 1703: Flat-Plate Photovoltaic Modules and Panels
CE Certification (Conformité Européenne)
Features
Multi-Standard Compliance: Simulates forward/reverse loads and dynamic fatigue cycles according to IEC standards.
Ultra-Precise Control: 0.1 N force feedback and ±5% pressure accuracy for reproducible results.
Automated Testing: Programmable cycle counts with AI-assisted real-time crack detection via EL imaging.
Safety First: Dual redundant emergency shutoff, load cell override, and overload protection at 6,000 Pa.
Modular Design: Quick-change fixtures accommodate framed, frameless, and flexible modules; expandable test area up to 3.0m × 2.0m.
User-Friendly Operation: 10” touchscreen HMI with preloaded IEC/UL test sequences and customizable pressure profiles.
Robust Construction: 304 stainless steel frame with epoxy coating ensures long-term durability.
Remote Monitoring & Self-Calibrating: Wi-Fi/Ethernet connectivity and auto-tare/linearity checks before each test.
Parameters
| Parameter | Specification |
|---|---|
| Test Area | 2.8m (L) × 1.8m (D) × 1.95m (H) |
| Forward Load | 5,400 Pa (adjustable) |
| Reverse Load | 2,400 Pa (adjustable) |
| Dynamic Load | 1,000 Pa, 1,000 cycles (7s+3s timing) |
| Pressure Accuracy | ±5% of setpoint |
| Force Sensor | 0.1 N resolution, 10 kN capacity |
| Power Supply | 230V AC, 50/60Hz (single-phase) |
| Air Supply | 6–8 bar (clean/dry air required) |
| Weight | 1,200 kg (net) / 1,500 kg (gross) |
在线联系供应商
Other supplier products
 |
Fabric Downproof Impact Tester | TheDrill Flocking Performance Testercould test down and/or feather penetration through the primary tick fabric of a specimen containing feather and... |
 |
Needle Flame Tester - lab instrument | Standard GB/T 5169.5: Electrical & Electronic Equipment – Needle Flame Test Method IEC 60695-11-5/IEC 60695-2-2: Fire Hazard Testing &n... |
 |
Skein Length Tester - Test Equipment | I. Product Overview TheFleece Loop Length Testeris a specialized instrument designed to measure the fiber loop length distribution in fleece fabri... |
 |
High Temperature Oxygen Index Tester | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125°C, offering better flammability assessment th... |
 |
Fabric horizontal burning tester - Test Equipment | Standard QB/T 2729: Leather – Horizontal flammability test for physical and mechanical properties. ASTM D5132: Horizontal burning rate of p... |
Same products
 |
Blanket Flammability Test Machine | 卖方: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
|
|
High Temperature Oxygen Index Tester | 卖方: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | 卖方: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | 卖方: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | 卖方: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
