Oil Filter Performance Tester
Applications include hydraulic filter testing, fastener fatigue testing, shoe bending evaluation, and flow fatigue analysis. Performance parameters are measured at intervals or at the end of the test, with failure criteria defined based on performance changes, appearance, or structural integrity.
(1) Hydraulic filter manufacturing: Evaluate filtration efficiency and dirt holding capacity over repeated cycles.
(2) Automotive and industrial components: Assess fatigue resistance of hoses, connectors, and fasteners.
(3) Research & Development: Optimize product durability and lifespan.
(4) Quality Control: Ensure batch-to-batch consistency of filters and components.
(5) Laboratory testing: Standardized evaluation of performance degradation under controlled conditions.
Standards
(1) ISO 16889 – Hydraulic fluid power – Filters – Multi-pass method for evaluation of filtration performance
(2) ASTM D5170 – Standard Test Method for Multi-pass Performance of Hydraulic Filters
(3) ASTM D2060 – Standard Test Method for Flow Fatigue of Lubrication Filters
(4) ASTM F3445 – Standard Test Method for Multi-cycle Fatigue Testing of Fasteners
(5) ISO 3724 – Hydraulic Fluid Power – Method for Evaluation of Filtration Performance
(6) ISO/DIS 19438-2004 – Hydraulic fluid power – Multi-pass filtration performance of filter elements
(7) ISO 4548-12:2000 – Hydraulic fluid power – Filter element endurance test
(8) GB/T 18853-2015 – Hydraulic filter multi-pass performance test method
(9) GB/T 8243.12-2007 – Hydraulic filter evaluation – Multi-pass test
Features
(1) Simulates long-term, repetitive use in an accelerated laboratory environment.
(2) Provides objective data on durability, fatigue, and wear.
(3) Predicts service life and ensures product reliability.
(4) Enables controlled evaluation of performance degradation over time.
(5) Supports R&D for more robust, long-lasting products.
(6) Fully compliant with multiple international and national standards.
Technical Parameters
| Parameter | Specification |
|---|---|
| Flow Range | Qv 5 L/min – 30 L/min |
| Pressure Drop Range | 0 – 500 kPa and 0 – 1 MPa (High Pressure Drop Resistance) |
| Media Temperature | Room Temperature – 90°C |
| Differential Pressure Measurement Range | 0 – 500 kPa |
| Test Dust | SOFTC-2A |
| Test Oil Tank Capacity | 30 L / 10 L |
| Adding Ash Rate | 0.06*Qv g/h (0.3 – 1.8 g/h) |
| Measurement Accuracy | Differential Pressure ±2 kPa (0 – 500 kPa) |
| Power Supply | AC 220V / 50Hz |
| Power Consumption | Approx. 15 kW |
在线联系供应商
Other supplier products
 |
Smoke Density Chamber | The main principle is to measure smoke density in a particular space, cable or material produced under specific conditions of combustion or radiati... |
 |
Full-Body Garment Stress Tester | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exerted by tight-fitting garments or wearable apparel... |
 |
45 Degree Automatic Flammability Tester | 45 Degree Automatic Flammability Testertest instrument is used to detect the flame resistance of the blanket fabric and the flame spread performanc... |
 |
Retro-Reflective Coefficient Tester | The Retro-Reflective Coefficient Tester is a precision instrument designed to evaluate the retro-reflective performance of high-visibility safety m... |
 |
Xenon Arc Weather Ometer SI4000 | Introduction： SI4000Xenon Arc Weather Ometer utilizes a xenon lamp to simulate ideal natural climate and sunlight conditions. It is suitable for s... |
Same products
 |
Air Intake Filter Test System | 卖方: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | 卖方: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | 卖方: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | 卖方: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
