Leather Seam Fatigue Tester

The leather seam fatigue testing machine is used to evaluate the fatigue strength of seams in automotive seat surface materials. Automotive seat surface materials (genuine leather, synthetic leather, fabric, etc.) often have a stitched seam structure, and the stitching strength and fatigue resistance of these seams directly affect the lifespan of the seat. By testing the strength and lifespan of the material seams, it is possible to effectively predict the seat's lifespan and identify areas for improvement to extend its service life.

Standard Test

ISO 5402: Leather physical testing – Flex tester method for adhesion and strength analysis.

SATRA TM55: Seam fatigue testing for footwear, ensuring stitching integrity under cyclic stress.

ASTM D6193: Loop strength testing for leather goods, critical for accessories like belts and bags.

GB/T 3903.32: Chinese national standard for footwear seam fatigue resistance.

EN 13520: Flexometer testing for coated fabrics, validating bonding durability in automotive interiors.

Feature

Quad-Testing Stations: Independent clamping mechanisms for parallel evaluation of seams, loops, or bonded joints.

Customizable Testing Modes:

Seam Fatigue: SATRA/ISO-compliant bending cycles (e.g., 50.000 cycles for footwear uppers).

Loop Strength: ASTM-standard tension tests for leather accessories.

Adhesion Integrity: EN 13520-compliant coating delamination analysis.

Advanced Control System:

7-inch touchscreen with preset protocols for footwear, automotive, and fashion industries.

Adjustable load cell (0–50N) for tension/compression testing.

Fail-Safe Mechanisms: Auto-stop function upon seam failure or cycle completion, with real-time data logging.

Ergonomic Design: Quick-release clamps for rapid sample mounting and tool-free angle adjustments.

Parameters

Parameter	Specification
Test Stations	1–4 (simultaneous operation)
Stroke Frequency	100–300 cycles/min (adjustable)
Bending Angle	0–90° (customizable)
Load Capacity	0–50N (adjustable)
Sample Dimensions	150 × 30 mm (standard)
Control System	PLC with touchscreen (programmable cycles, angles, loads)
Power Supply	220V/50Hz, 120W
Dimensions	600 (L) × 450 (W) × 500 (H) mm
Net Weight	45 kg
Cycle Counter	Digital (1–999.999 cycles)

Other supplier products

	Vehicle Cabin Air Filter Tester	Applicable standards DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration ...
	UV Viewing Cabinet	The UV Viewing Cabinet is a precision instrument designed to detect and analyze fluorescent substances in a wide range of materials. By providing c...
	Wool Fineness Analyzer	The Wool Fineness Analyzer measures wool fiber fineness using the airflow method. By forcing air through a measured mass of wool under controlled p...
	MMT Liquid Water Separation Tester | Testing Equipment	TheMMT Liquid Water Separation Testeris a precision instrument designed to evaluate the water repellency and separation efficiency of textile mater...
	Contact heat transmission test machine	This part of ISO 12127 specifies a test method designed to evaluate the heat transfer and the behaviour ofmaterials used for protective clothing wh...

供应产品

Same products

	Blanket Flammability Test Machine	卖方: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	卖方: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	卖方: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	卖方: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	卖方: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...