Walk-in Constant Temperature and Humidity Test Chamber
The Walk-in Constant Temperature and Humidity Test Chamber is suitable for conducting accelerated humidity and heat testing, cyclic humidity and heat testing, and constant humidity and heat testing on large components, semi-finished products, electronic and electrical equipment, precision instruments, lithium batteries, chemical products, automotive parts, and pharmaceuticals. It can also be used for constant temperature and humidity storage in warehouses and production under workshop conditions, enabling analysis and evaluation of product performance and behavior under simulated environmental conditions during testing.
Standards
GB/T2423.3 Environmental Testing of Electronic and Electrical Products Ca: High Temperature Test Method
GB10589-89 Technical Conditions for Low Temperature Testing
GB/T2423.4-93.507.2 Alternating Humidity and Heat Test
GB/T2423.3-93 Constant Temperature and Humidity Test Method
GB5170.5.-96 Requirements for “Verification Methods for Basic Parameters of Environmental Test Equipment for Electrical and Electronic Products”
Requirements of GJB150. IEC, and other standards
Parameters
| Item | Specification |
|---|---|
| Test Area Dimensions | The specific dimensions shall be determined by the customer according to actual usage! |
| External Dimensions | Subject to the quotation. |
| Operating Temperature Range | SBH: +85°C (100°C, 120°C) ~ 0°C (A: 0°C, B: -20°C) |
| Relative Humidity Range | 30% ~ 98%RH- Temperature Deviation: ≤±2°C- Humidity Deviation: +2/-3%RH- Temperature Fluctuation: ≤±0.5°C |
| Heating Time | ≤40min |
| Cooling Time | 30min ~ 180min (varies by model) |
| Material | Exterior: A3 steel plate with spray coatingInterior: SUS#304 stainless steelInsulation: PU foam and insulation board |
| Temperature & Humidity Control System | Equipped with imported fully/ semi-hermetic compressors from the US/Europe, R134a/R404a refrigerant, axial flow fans (side/top discharge), high-performance heaters, steam humidification, and ADP critical dew point cooling dehumidification. Air-cooled or water-cooled dual-system refrigeration. |
| Controller | Programmable type uses Yongheng self-developed touch screen or Korean TH500 controller.Display accuracy: Temperature 0.1°C, Humidity 0.1%RHControl mode: Program/constant value, microcomputer PID controlInput signal: Platinum resistance PT100 |
| Observation Window | Multi-layer hollow electroplated heated explosion-proof glass |
| Other Accessories | Test holes, lighting, feet, shelf racks (or as specified by customer) |
| Safety Devices | Over-temperature protection, leakage protection, water shortage protection, humidification system protection, compressor over-pressure/overload/over-current protection, fan over-speed protection, phase sequence protection |
| Power Supply | AC380V (1±10%) V, 50±0.5HZ, 3-phase 4-wire + protective earth |
| Optional Accessories | Temperature & humidity recorder, USB & 485 communication, SMS alarm, choice of controller/compressor brand, dual refrigeration system, etc. |
| Extendable Products | Walk-in environmental test chamber, high-low temperature test room, high-temperature aging room, constant temperature & humidity workshop/room, dust-free room, purification room, etc. |
| Special Notes | Custom dimensions are available to meet customer requirements. |
在线联系供应商
Other supplier products
 |
Fiber Oil Extractor | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Rapid Grease Extraction Apparatus Testing Standard... |
 |
Single Station Jounce Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Applications of the Single Station Jounce Tester include, but are not limited to, ... |
 |
Nissan Scratch Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Scratch Tester is designed to evaluate the scratch resistance of materials suc... |
 |
Fabric Static Tensile Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Fabric Static Tensile Tester is designed to evaluate the elongation and tensil... |
 |
Needle Flame Tester | Application The needle flame tester is widely used in various fields, including but not limited to the following applications: Electrical and ele... |
Same products
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
