Air Flow Velocity Distribution Test System
Applications
development of filter housings and air-ducting elements in general
comparison of models for flow simulation with measured values
Flow field uniformity analysis of air filters and filter assemblies;
Flow behavior evaluation of engine intake systems and intake filter housings;
Optimization of installation positions for air velocity and mass air flow sensors (e.g. MAF sensors);
R&D validation of ventilation equipment, air supply modules, and air handling units;
Comparison and verification of CFD simulation results with measured data;
Performance assessment of new air duct designs, guide vanes, and flow straightening structures.
Standards
The system can be used in accordance with the following standards and technical references:
(1) GB/T 1236 Industrial Fans – Performance Testing Methods
(2) GB/T 10178 Industrial Fans – Field Performance Testing
(3) ASHRAE Handbook – Fundamentals (Air Flow Measurement and Testing Sections)
Technical data
| Parameter | Unit | Value |
|---|---|---|
| Test flow rate | m³/h | 20 … 900 |
| Air flow velocity | m/s | 1 … 40 |
| Test specimen dimensions | mm | max. 485 × 600 |
| Differential pressure of test specimen | Pa | – |
| System dimensions (W × H × D) | mm | 2500 × 2660 × 1300 |
| Weight | kg | approx. 550 |
在线联系供应商
Other supplier products
 |
Xenon Arc Weatherometer | The xenon arc lamp, which is capable of simulating the whole natural sunlight spectrum in the most consistent manner, can reproduce the destructive... |
 |
Plastic Smoke Density Tester F313 | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific optical density of smoke generated during the comb... |
 |
Fully automatic spinneret mirror inspection instrument (short fiber spinneret) - Test Equipment | Manufacturing Standards Produced according to GB/T19001-2016 / ISO9001 quality management system. Mechanical and electrical design conforms to GB... |
 |
Hexapod Tumbler test machine - Test Equipment | Standard BSEN 1471:1997: Evaluation of Appearance Changes in Floor Coverings ISO 9405:2001: Floor Coverings – Determination of Appearance C... |
 |
Universal Abrasion Resistance Tester | The G282 Universal Abrasion Tester performs flat abrasion, curved abrasion, edge abrasion, folded edge abrasion, and resistance to frosting, pillin... |
