Indicative Fire Resistance Test Furnace ISO 834-1,EN 1363-1Advanced heat insulation test furnace for fireproof coatings
The Fireproof Coating Test Furnace evaluates thermal insulation and fire resistance of steel-structure coatings, complying with GB 14907-2018. It features automatic fire-curve tracking, stable pressure control, precise temperature measurement, and an intelligent platform, offering a reliable, highly automated testing environment for labs, inspection centers, manufacturers, and certifiers.
Application
This test furnace is suitable for determining:
1. Thermal insulation efficiency of steel structure fireproof coatings
2. Fire resistance limit of coated steel components
3. Back-surface temperature rise under standard fire exposure
4. Heating and furnace-pressure stability during fire resistance tests
It is widely used in:
5. Fire protection coating manufacturers
6. Building material testing laboratories
7. National and third-party inspection institutes
8. Research universities and engineering research centers
9. Fireproof material certification and quality evaluation agencies
Standards
This instrument is developed and manufactured in accordance with the following standards:
Primary Standards
GB 14907-2018 – Fire-Resistant Coatings for Steel Structures
GB/T 9978-2008 – Fire-Resistance Tests for Building Construction Elements
International Standards
Although the furnace is primarily based on Chinese national requirements, its fire-curve control and measurement systems align with major global fire-test methodologies, including:
ISO 834 – Standard Fire Resistance Test Curve
EN 13381 Series – Test methods for determining the contribution of fire protection materials to structural elements
ASTM E119 – Standard Test Methods for Fire Tests of Building Construction and Materials
BS 476 (Part 20–24) – Fire tests on building materials and structures
This compatibility allows the furnace to support laboratories that reference or compare international fire-test systems.
Features
The furnace incorporates advanced design and control technology to ensure stable, accurate, and repeatable testing.
Control System
Touchscreen and PC dual-control interface
Wireless connection supported; one PC can manage multiple furnaces
Automatic elimination of faulty thermocouples to maintain curve accuracy
Testing Performance
Full-automatic testing process from ignition to cooling
Real-time tracking of temperature and pressure curves
Automatic re-ignition if the flame is extinguished during testing
Automatic stop when reaching preset temperature or test duration
Safety and Reliability
Anti-power-off protection mode to avoid damage caused by sudden shutdown
Automatic cooling and exhaust system at the end of the test
Temperature deviation consistently lower than the limits required by GB standards
Data Management
Storage capacity for more than 100 sets of test data
Curve display for furnace temperature, back-surface temperature, and pressure
User-friendly interface for on-site operation or remote control
Parameters
| Item | Specification |
|---|---|
| Working Voltage | AC 220V ± 10%, 50 Hz |
| Power Consumption | 3 kW |
| Furnace Pressure Range | 0–100 Pa |
| Pressure Control Accuracy | 20 ± 3 Pa |
| Airflow Range | 0–50 m³/min |
| Airflow Accuracy | ≤ ±0.5 m³/min |
| Fuel Type | 0# or −10# diesel |
| Standard Fire-Curve Temperature Program | 60 min: RT–925°C; 120 min: RT–1050°C; 180 min: RT–1115°C; 240 min: RT–1150°C; 300 min: RT–1180°C; 360 min: RT–1210°C |
| Furnace Temperature Sensors | 4 pcs K-type armored thermocouples |
| Back-Surface Temperature Sensors | 2 pcs, accuracy ±4°C |
| Temperature Control Mode | Average or independent control |
| Heating Mode | Fully automatic diesel spray burner |
| Cooling Mode | Automatic exhaust and cooling |
| Timing Range | 0–360 min |
| Data Storage Capacity | ≥100 sets |
| Sample Size | 500 × 500 × 6 mm |
| Overall Dimensions | 1.6 m × 1.6 m × 1.6 m |
Test Procedures
1. Cut the sample using a 250mm × 90mm template. If the sample is a melt-shrinkable product, use a 250mm × 180mm template.
2. Clamp the sample in a 250mm × 90mm sample holder, tighten the wing nut, and secure the sample. The sample holder size for melt-shrinkable products is 250mm × 180mm. At this point, do not yet mount the sample holder onto the horizontal rod.
3. Turn on the power switch and set the ignition time to a slightly longer duration, such as 5 minutes. Select the appropriate positioning device according to the ignition method. After pressing "Start Test" and the burner stops at the 45° position, insert one end of the positioning device into the burner. Now mount the sample holder onto the horizontal rod and adjust the sample holder's up, down, left, and right positions to meet the test requirements. Remove the positioning device. Press the return key. After the burner resets, press "Test Reset".
4. Press and hold the ignition button, and simultaneously adjust the flame adjustment valve on the instrument panel. After igniting the gas, adjust the flame height to 20 ± 1mm. When adjusting the flame from large to small, it is easier to first tighten the flame adjustment knob on the panel. The height gauge should be at 20mm. Close the front door.
5. Place two pieces of filter paper in the collection tray and then place it under the sample.
6. Set the ignition time, press "Start Test," and the burner will automatically rotate to the 45° position and remain there for the set ignition time, then reset. The afterglow time starts counting simultaneously. If the sample stops afterglow before reaching the marked line, press "Stop Afterglow." If the sample afterglow reaches the marked line, immediately press "Stop Afterglow." Record the burning time.
7. Press "Test Reset" to stop the test. To continue the test, repeat the above steps; otherwise, turn off the power. Provided by Shandong Provincial Textile Science Research Institute.
在线联系供应商
Other supplier products
 |
Fabric thickness tester | Fabric thickness tester mainly used to measure the thickness of the fabric, suitable for leather, rubber and textiles and other materials, the thic... |
 |
Fiber Crimp Elasticity Measuring Device (for Fiber Crimp Elasticity Tester) | Product Introduction: YG362C fiber crimp elasticity meter is used for crimp degree of 1-22dtex fiber. Crimp elasticity, crimp recovery rate index... |
 |
Vertical Flammability Chamber | VTEC Vertical Flammability Chamber： Testing Standards: ASTM D6413-99. DOC-FF 3/71. CALIF TB-117. GB/T 5455. CPAI-84 Applications: Vertical Flamm... |
 |
Residual Ethylene Oxide Gas Chromatograph | The ethylene oxide residual gas chromatograph is a professional analytical instrument for detecting the residual amount of ethylene oxide in medica... |
 |
Steam Jet Test Chamber，anti-corrosion steam spray testing chamber | The Steam Jet Test Chamber is designed to evaluate the durability and performance of materials and components under high-pressure steam exposure. A... |
