Cabin Air Filter Test System（Particulate Filtration），Cabin Filter Efficiency Testing System
Test system for testing particle separation of air filters for passenger compartments (DIN 71460-1. ISO/TS 11155-1). With the test system for cabin air filters acc. to DIN 71460-1 (particle filtration) all relevant filter performance parameters such as differential pressure drop, gravimetric or fractional filtration efficiency and dust holding capacity are determined.
The setup and configuration of the test system as well as the required test procedures are described in the standards DIN 71460-1 and ISO/TS 11155-1 for motor vehicle passenger compartment particle filtration.
Tests acc. to standards DIN 71460-2 and ISO 11155-2 can be carried out using PAF 112 test system for adsorptive cabin air filters.
For filter tests acc. to standards DIN 71460-1. ISO/TS 11155-1 and DIN 71460-2. ISO 11155-2 Topas has designed PAF 113 filter test system combining all features of test systems PAF 111 and PAF 112.
Applications
Differential pressure test
Analysis of fractional separation efficiencydust loading tests
Combined analyses according to DIN 71460-1 (ISO/TS 11155-1)
Customised tests
Standards
(1) GB/T 32085.1 — Automotive Air Conditioning Filters — Part 1: Dust Filtration Test
(2) ISO/TS 11155-1 — Road Vehicles — Cabin Air Filters — Part 1: Dust Filtration Test
(3) DIN 71460-1 — Road Vehicles — Passenger Compartment Air Filters — Part 1: Particulate Filter Test Methods
Features
Standard compliant testing of filter elements and filter mediamodular setup and instrumentation
Design on different flow rate and differential pressure ranges
High degree of automation
Traceable test documentation
Technical data
| Parameter | Unit | Value |
|---|---|---|
| Test flow rate | m³/h | 70 … 700 (higher flow rates on request) |
| Measuring range, differential pressure | Pa | 0 … 1000 |
| Compressed air supply (operating gas/air) | bar | 6 |
| Power supply | – | – |
| Test specimen dimensions | – | max. 300 × 600 mm |
| Aerosol generation technology | – | Dust disperser SAG 410/L, Atomizer ATM 220 |
| Aerosol conditioning technology | – | Electrical Aerosol Neutralizer EAN 581 |
| Aerosol measurement technology | – | Aerosol spectrometer |
| Sensors | – | Differential pressure, absolute pressure, temperature, relative humidity |
| System dimensions (W × H × D) | mm | 4600 × 3400 × 1200 |
Accessories
Atomizer Aerosol Generator
Dust disperser
Laser Aerosol Spectrometer
Dilution system
Electrostatic Aerosol Neutralizer
Filter media adapter with sampling system
Additional pressure sensors
PAF111Win - test system control, data acquisition and processing software
Test Procedures
(1) Install the filter element or filter media sample and verify airtight sealing to prevent bypass leakage.
(2) Set the required test airflow according to the selected standard and allow the system to stabilize.
(3) Activate the aerosol generation system and adjust the concentration to the specified level.
(4) Measure upstream and downstream particle concentration and size distribution to calculate fractional filtration efficiency.
(5) Record the pressure drop across the filter simultaneously.
(6) For dust holding capacity tests, continuously load standard dust while monitoring pressure drop increase.
(7) Terminate the test when the specified end condition is reached and save all data.
(8) Generate and review the test report for performance evaluation and comparison.
Maintenance Information
Regularly calibrate airflow sensors, particle measurement instruments, and pressure transducers to maintain measurement accuracy.
Clean the test duct and aerosol paths after dust loading tests to prevent cross-contamination.
Inspect seals, adapters, and connections periodically to ensure system airtightness.
Replace protection filters and consumables according to usage conditions and standard recommendations.
Maintain the aerosol generators and neutralization devices in accordance with manufacturer guidelines.
在线联系供应商
Other supplier products
 |
Dry and Wet Retroreflectometer | The Dry and Wet Retroreflectometer, also known as the Dry and Wet Sand Abrasive Wear Testing Machine, is designed to evaluate the wear resistance o... |
 |
Medical injection needle puncture force tester | The Medical Injection Needle Puncture Force Tester is a precision instrument designed to evaluate the puncture performance of medical needles. It s... |
 |
Catheter bending resistance tester | The Catheter Bending Resistance Tester is a specialized instrument designed to evaluate the bending performance and flow characteristics of cathete... |
 |
UV Accelerated Weathering Tester | Standard： ASTM D4329、ASTM D4587、ASTM D4799 、ASTM D5208、ASTM G151、ASTM G154 、EN 927-6、EN 1297 、EN 1898 FIBC、EN 12224 、EN 13523-10 、ISO 4892-1、ISO 4... |
 |
Dry Sand Rubber Wheel Abrasion Tester | Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi... |
Same products
 |
Carpet Pilling and Abrasion Tester | 卖方: Standard Groups | This instrument is used to simulate the pilling and fuzzing phenomena that occur during the norma... |
 |
380V industrial rain test chamber | 卖方: Standard Groups | Detailed Product Description STANDARD Comprehensive Rain Test Box Spray Ring Radius: 235 (mm) Wat... |
 |
380V comprehensive rain test chamber | 卖方: Standard Groups | Detailed Product Description STANDARD Comprehensive Rain Test Box Spray Ring Radius: 235 ... |
 |
explosion tester manufacturer | 卖方: Standard Groups | 20L Spherical Explosion Tester is characterized by accurate test data and ease of use. Its throug... |
 |
20 Liter Explosion Test Chamber | 卖方: Standard Groups | This instrument is used to measure the explosion index of dust or gas mixtures. The instrument un... |
