Differential Pressure Method Gas Permeability Tester，ASTM D1434 Gas Permeation Analyzer
Whats/App: +86 156 1874 6768
Web: standard-groups.com
TheDifferential Pressure Method Gas Permeability Testeris a precision laboratory instrument designed to measure the gas permeability of various materials under controlled differential pressure conditions. You can use it to evaluate O₂, CO₂, N₂, and air transmission rates through films, sheets, high-barrier materials, metal foils, and rubber. This instrument provides reliable data for material selection, quality control, and product development in packaging, engineering plastics, aerospace, and chemical industries.
Applications
The Differential Pressure Method Gas Permeability Tester is suitable for measuring the permeability rates of various gases—including O₂, CO₂, N₂, and air—through materials such as plastic films, composite films, high-barrier materials, sheets, metal foils, and rubber.
Standards
YBB 00082003 Determination of Gas Permeability of Pharmaceutical Packaging Materials
GB/T 1038.1-2022 Plastics - Films and Sheets - Test Methods for Gas Permeability - Part 1: Differential Pressure Method
ASTM D1434 Standard Test Method for Determining Gas Permeability of Plastic Films and Sheets
ISO 2556 Plastics - Determination of gas transmission rate of films and sheets at atmospheric pressure - Pneumatic method
ISO 15105-1 Plastics - Films and sheets - Determination of gas transmission rate - Part 1: Differential pressure method
JIS K7126-A Test method for gas transmission rate of plastic films and sheets by differential pressure method
Features
1.Features standard membrane calibration and external sensor calibration functions
2.Real-time monitoring of test status with full-process data logging ensures complete reproducibility of all test data curves, facilitating post-test evaluation of the testing process
3.Features an open database system for streamlined data analysis
4.Simultaneously measures gas transmission rate, solubility coefficient, and diffusion coefficient of test specimens
5.Three fully independent test chambers enable concurrent testing of three identical or different specimens
6.Wide-range, high-precision temperature and humidity control accommodates diverse testing conditions
7.Offers dual test process evaluation modes: proportional and fuzzy logic
8.Test range can be extended as needed to accommodate high permeability testing requirements
9.Enables data fitting at any temperature, facilitating acquisition of test results under extreme conditions
10.Supports testing of toxic, flammable, and explosive gases (requires modification)
11.Computer-controlled system automates the entire testing process
12.Provides standard membranes for rapid calibration, ensuring accuracy and universality of detection data
13.Equipped with RS232 universal data interface for convenient data transfer
Parameters
| Item | Specifications |
|---|---|
| Measurement Range (Film) | 0.01 ~ 50000 cc/m²·24h·0.1MPa |
| Number of Test Samples | 3 |
| Number of Main Sensors | 3 |
| Test Mode | Single-chamber independent |
| Vacuum Resolution | 0.1 Pa |
| Vacuum Degree | < 10 Pa |
| Temperature Control Range | 5°C ~ 65°C |
| Temperature Control Accuracy | ±0.1°C |
| Test Pressure | Upper test gas chamber: -0.1 MPa ~ +0.15 MPa (standard)Lower permeation gas detection chamber: 0 ~ 1333.33 Pa |
| Gas Source Pressure | 0.4 MPa ~ 0.6 MPa |
| Test Gas | O₂, N₂, CO₂ or other gases |
| Gas Inlet Interface | Φ6 mm |
| Vacuum Pipe Diameter | 1/4" |
| Calibration Method | Standard film calibration, external calibration of vacuum sensor |
| Sample Thickness | ≤3 mm |
| Sample Size | Φ97 mm |
| Permeation Area | 38.48 cm² |
| Main Unit Dimensions (L×W×H) | 760 mm × 575 mm × 450 mm |
| Main Unit Weight | 88 kg |
| Power Supply | AC100 ~ 240V 50/60Hz |
Accessories
Standard main unit
Temperature control system
Computer with professional software
Dedicated sample extractor
Vacuum grease
Quick quantitative filter paper
Vacuum pump
Test Procedures
1.Prepare and place samples in the upper and lower test chambers; ensure correct positioning and clamping.
2.Evacuate the lower chamber to a preset vacuum level and then apply vacuum to the entire system.
3.Close the lower chamber and introduce the test gas to the upper chamber, creating a stable differential pressure across the sample.
4.Monitor the pressure change in the lower chamber to determine gas transmission rate.
5.Record and save data curves for permeability, solubility, and diffusion coefficients.
6.Repeat for multiple samples if required.
在线联系供应商
Other supplier products
 |
Liquid Sustained Combustion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This product complies with "Recommendations on the Transport of Dange... |
 |
Export Leakage negative pressure tester for infusion device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument is compliant with the following standards, including relevant int... |
 |
Spinneret Inspection Microscope，automatic spinneret mirror inspection instrument | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction ① Mechanical Components Overview 1. This machine employs an X-Y-Z three-axis... |
 |
Rubber non-rotor vulcanization Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Rubber Non-Rotor Vulcanization Tester is a precision instrument designed for the rubber... |
 |
Minimum Ignition Energy (MIE) – Dust Cloud Tester，CE certified dust cloud ignition tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be t... |
Same products
 |
Metal Angular Fixator Testing Machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Angular Fixator Testing Machine... |
 |
Bone Plate Four-Point Bending Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plate Four-Point Bending Fatigue... |
 |
Bone Plates Static Four - point Bending Tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plates Static Four-Point Bending... |
 |
Spinal Internal Fixation System Assembly Testing Machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Assem... |
 |
Spinal Internal Fixation System Component Testing Machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Compo... |
