Multifunctional Rapid Thermal Conductivity Tester (TPS & Hot Disk Method)，Benchtop High-Precision Material Thermal Conductivity Tester

Multifunctional Rapid Thermal Conductivity Tester (Integrated Unit) is a high-precision instrument based on the Transient Plane Source (TPS) method, utilizing a Hot Disk probe. It measures thermal conductivity, thermal diffusivity, specific heat, heat storage coefficient, and thermal resistance of solid, powder, liquid, paste, coating, thin-film, insulation, and anisotropic materials.

The instrument provides rapid and accurate testing, avoiding contact resistance errors inherent in steady-state methods. Minimal sample preparation is required; solid materials only need a relatively flat surface. The tester supports various test protocols and mathematical models for different material types, offering broad applicability, fast testing, and reliable results.

Reference standards: ISO 22007-2:2015. GB/T 32064-2015.

Application

The tester is widely used for thermal characterization of:

Metals, alloys, and graphite

Thermal pastes, silicone, and rubber

Ceramics and composite ceramic materials

Polymers, paper, fabrics, foams, and insulation materials

Concrete, composite panels, and paper honeycomb structures

Anisotropic materials

Typical applications include:

Rapid thermal property testing in R&D and quality control laboratories

Characterization of high and low conductivity materials

Evaluation of thermal behavior in powders, pastes, liquids, coatings, and thin films

Thermal analysis of construction, aerospace, electronics, and insulation materials

Standards

ISO 22007-2:2015 – Determination of Thermal Conductivity and Thermal Diffusivity of Solids by Transient Plane Source (TPS) Technique

GB/T 32064-2015 – Thermal Conductivity Test Method Using Transient Plane Source (TPS) Technique

Parameters

Item	Specification
Thermal conductivity range	0.001–500 W/(m·K); resolution 0.0001 W/(m·K)
Thermal diffusivity range	0.1–100 mm²/s
Heat storage coefficient	0.1–30 W/(m²·K)
Specific heat	0.1–5 kJ/(kg·°C)
Thermal resistance	0.5–0.000005 mm²·K/W
Temperature measurement accuracy	≤0.0001 °C
Measurement relative error	≤3%
Repeatability error	≤3%
Test duration	1–120 seconds
Sample environment temperature	-40–150 °C (standard); optional -50–250 °C, vacuum environment available
Probe diameter	Standard Φ15 mm; optional Φ30 mm, Φ15 mm, Φ7.5 mm, Φ4 mm
Sample types	Solid blocks, powders, pastes, liquids, coatings, thin films, insulation materials, anisotropic materials
Automation	Full software-controlled measurement, parameter analysis, and report output
Power supply	AC 220 V ±10%, 50/60 Hz; total power <500 W
Form factor	Integrated compact unit, desktop installation

Features

Rapid measurement: 1–120 seconds testing time saves significant laboratory time.

No contact resistance influence: TPS method avoids errors from contact resistance in steady-state methods.

Minimal sample preparation: Solid samples require only a relatively flat surface; powders, pastes, and liquids are easily accommodated with specialized test holders.

Versatile testing: Supports thin materials, high thermal conductivity (100–500 W/m·K), low conductivity insulation (0.010–0.050 W/m·K), and anisotropic materials.

Full automation: Software-controlled testing, data analysis, and report generation.

Compact design: Integrated unit saves space and allows easy installation.

Accessories

Main instrument

Analysis software (Chinese & English versions)

Two quartz reference samples

Accessory kit: paste, powder, and liquid test holders; sample fixture for solid materials

Test Procedures

Prepare the sample according to its state: solid, powder, paste, liquid, or thin film. Solid samples require a relatively flat surface.

Place the Hot Disk probe on or within the sample. Use the appropriate fixture for powders, pastes, or liquids.

Configure test parameters via the software, including probe diameter, temperature, and material type.

Start the test; the software records temperature changes over time.

Software calculates thermal conductivity, thermal diffusivity, specific heat, heat storage coefficient, and thermal resistance.

Review data and generate the report.

Maintenance Information

Keep the Hot Disk probe clean and free from residues.

Calibrate periodically using quartz reference samples.

Check the integrity of sample holders and fixtures before each test.

Maintain a stable laboratory environment to ensure measurement accuracy.

Store the instrument in a dry environment to protect electronic and thermal components.

Other supplier products

	Falling Sand Abrasion Tester	Applicable Standard JG/T 133-2000 ASTM D968-83 ASTMD333 ASTMD1395 ASTMD2205 Main Purposes It is mainly used to test the abrasion - resistanc...
	Abrasive Wear Test device	Standard ASTM G65 - 04 GB/T 3960-1983 Main Purposes The wet - type rubber wheel abrasive wear testing machine is primarily employed to assess t...
	Dry Sand Rubber Wheel Wear Tester	Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi...
	Mask respiratory resistance tester	Mask & Respirator Breathing Resistance Tester Respirator Breathing Resistance Tester is used to measure the respiratory resistance and expirat...
	Keyboard Key Life Testing Machine	The Keyboard Key Life Testing Machine is designed to evaluate the durability and lifespan of keys and buttons across electronic devices. It is suit...

供应产品

Same products

	Common Rail Injector Valve Set F00RJ00339	卖方: Pioneer Diesel Parts	Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The Common Rail ...
	Fuel Injection Pump for Yanmar Wb93r Wb97r Wb97s Wb98a	卖方: Pioneer Diesel Parts	Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The Fuel Injecti...
	VE Injection Pump VE3/9F1500L376AG	卖方: Pioneer Diesel Parts	Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The VE Injection...
	Automotive seat durability and strength testing machine	卖方: Standard International Group (HK) Limited	The Automotive Seat Three-Station Headrest and Backrest Static Strength Testing Machine is design...
	Racing Seatback Headrest Restraint Device, Front and Rear Impact Testing Machine	卖方: Standard International Group (HK) Limited	The Racing Seat Headrest Restraint and Front-Rear Impact Testing Machine is designed to evaluate ...