New warm body dummy tester
Product Description
In addition to heat dissipation to the surrounding environment through conduction, convection and radiation, the human body also loses heat through the evaporation of sweat on the surface of the human skin. If the water vapor can spread to the surrounding environment through the clothing system in time, the person will feel comfortable. If the clothing blocks the passage of the water vapor, the humidity in the microclimate between the human skin and the clothing will increase, the water vapor will accumulate to a certain extent and condense into water, making people feel uncomfortable. When the human body carries out strenuous activities or is in a hot environment, the evaporation of sweat becomes an important way for the human body to lose heat, and at this time, it is more necessary for clothes to have sufficient water vapor transmission capacity. Therefore, it is necessary to measure the evaporation resistance of clothing accurately in order to make a comprehensive evaluation of the heat and humidity transfer performance of clothing.
Meet the standard
ISO15831.GB/T 39605-2020
Scope of application
Building heat ventilation and air conditioning, aircraft, car comfort, all kinds of clothing thermal resistance test, wet clothing, sportswear research, cold and warm room on the human body impact analysis, high and low temperature environment, such as special fire experiment environment.
1. Building heat, ventilation and air conditioning.
2. Evaluation of aircraft and cars.
3. Thermal resistance test of all kinds of clothing.
4. Research on wet clothing and sportswear.
5. Analysis of the influence of heating and cooling rooms on the human body.
6. In high and low temperature environment, such as special fire test environment.
Main features
1. The whole body of the warm body dummy is divided into 35 anatomical sections such as head, trunk and limbs. Each section has adiabatic and fine tuning heater in each section.
2. In the control software part, the internal heat of the human body model, the temperature insulation performance of the clothing, the surface temperature evaluation of the human body model, the calculation of heat dissipation value, etc., can process various measurement data and record and statistical processing.
3. When making the human model of the warm body dummy, polymer functional materials with small heat capacity are used, which can quickly handle the heat reaction and heat exchange process of the human model.
4. Thermal nickel wire sensor, connected to the whole system, can measure the average temperature in each segment with good sensitivity.
5. Joints, shoulders and knees can be bent and changed into standing or sitting position, easy to disassemble clothes.
6. The warm body dummy system is equipped with the lifting frame of the human model, which can easily move the human model.
Product parameters
The body shape and size conform to the characteristics of human physiological anatomy;
Model size: The model is the Chinese male P50 human form size.
Standard measurement area: 35 area independent control of thermal energy area
Joint connection: shoulder, hip, knee, elbow and ankle joints
The center temperature range: 37±0.1℃。
The whole body heating wire and wired temperature and humidity sensors (including no less than 70 temperature sensors, no less than 34 humidity sensors) can accurately control and measure the skin temperature, temperature sensor accuracy ±0.1 ° C, humidity sensor accuracy: ±3%
Under normal circumstances, large heating power 1200W/㎡ (dry and wet);
Can also be used in wet skin;
The use of environmental requirements: temperature -50 to 150℃.
在线联系供应商
Other supplier products
 |
Fully Automatic Continuous Flow Reaction Calorimeter | This product is a highly automated and customizable continuous flow reaction thermal analysis and calorimetry platform. It features automatic sampl... |
 |
STD Battery short-circuit tester丨STD Battery short-circuit chamber | Product Introduction Battery Short Circuit Tester is a device that can be applied to the external short circuit test process of lithium ion batter... |
 |
Face Mask Tensile Tester | The Face Mask Tensile Tester is designed to measure tensile strength, elongation at break, and related mechanical properties of various textiles an... |
 |
Light transmittance fog meter | Applicable standards: GBT 2410-2008: Determination of light transmittance and fog degree of transparent plastics. This is the national standard of... |
 |
Camera test light box | Standard ISO 12233: Compliant with SFR (Spatial Frequency Response) testing for lens resolution. IEC 62679: Photometric requirements for video ca... |
Same products
 |
Common Rail Injector Valve Set F00RJ00339 | 卖方: Pioneer Diesel Parts | Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The Common Rail ... |
 |
Fuel Injection Pump for Yanmar Wb93r Wb97r Wb97s Wb98a | 卖方: Pioneer Diesel Parts | Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The Fuel Injecti... |
 |
VE Injection Pump VE3/9F1500L376AG | 卖方: Pioneer Diesel Parts | Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The VE Injection... |
 |
Automotive seat durability and strength testing machine | 卖方: Standard International Group (HK) Limited | The Automotive Seat Three-Station Headrest and Backrest Static Strength Testing Machine is design... |
 |
Racing Seatback Headrest Restraint Device, Front and Rear Impact Testing Machine | 卖方: Standard International Group (HK) Limited | The Racing Seat Headrest Restraint and Front-Rear Impact Testing Machine is designed to evaluate ... |
