benchtop seat belt abrasion tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
This bench-top style tester allows the operator to load test specimens, thread seatbelt material over them, and run controlled abrasion cycles. The test automatically stops once the preset number of cycles is reached, after which samples are visually inspected for wear or damage.
Standards
(1) ASTM D6770 – Webbing abrasion resistance test
(2) FED STD 191 – Test method standard for textiles
(3) FLTM BN 163-01 – Ford motor industry seat belt webbing abrasion standard
(4) FMVSS 209 – U.S. Federal Motor Vehicle Safety Standard for seat belt webbing
(5) MIL-232223B – Military seat belt material abrasion requirements
(6) MIL-T8363B – Military specification for textile webbing
(7) SAE J339 – Seat belt webbing abrasion and performance test
(8) S5 1(d) – Vehicle safety textile test method
(9) GB/T 3923.1 – Textile fabrics: Tensile properties of woven fabrics
(10) SAE J114-1994 – Safety belt webbing abrasion requirements
(11) ISO 22612:2017 – Textiles: Resistance to surface wear
(12) ISO 13934-1 – Textile fabrics: Tensile properties of fabrics
Test Procedures
Prepare seat belt samples and install securely in the five-station clamps.
Adjust friction devices to ensure uniform contact with each sample.
Input desired cycle count (e.g., 2.500 cycles) for each station.
Start automated testing; the machine stops automatically upon completion.
Remove samples and visually inspect for wear; optionally conduct strength tests.
Compare pre- and post-test performance and generate a testing report.
Maintenance Information
Keep friction rollers and contact surfaces clean and free from debris.
Periodically inspect motor, drive system, and clamps for wear.
Calibrate cycle counters to maintain accurate readings.
Ensure protective covers and emergency stop functions remain operational.
Store tester in a dry, clean environment to prevent corrosion or damage.
在线联系供应商
Other supplier products
 |
Pin-on-Disc Friction and Wear Test Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 3960-2016 Plastics – Determination of Sliding Wear Properties ASTM G... |
 |
Spinal Internal Fixation Components System Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0961-2014 (China): Specifies static/fatigue testing protocols for spinal fix... |
 |
Film Heat Shrinkage Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The film heat shrinkage rate tester is a device specifically designed to measure the shrink... |
 |
Carpet Taber Abrasion Testing Machine EN 1307 Factory Price | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features You can evaluate carpet abrasion resistance using standardized fric... |
 |
Qinsun Ci xenon lamp aging test chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Ci Series Weather-Ometers are the most widely used rotating rack water-cooled xenon-arc... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
