.

Chemical Protective Clothing Testing Equipment

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Application

This equipment is used for the following applications:

(1) Performance evaluation of chemical and biological protective suits

(2) Dynamic integrity testing of gas-tight and liquid-tight protective garments

(3) Sealing performance assessment at interfaces such as head–neck, wrists, and waist

(4) Testing of protective headgear and integrated respirator systems

(5) Research on material durability and degradation under mechanical motion

(6) Certification, verification, and compliance testing in controlled chambers or test tents

Standards

The system is designed to meet or reference the following standards and test specifications:

(1) ISO 13982-1 — Protective clothing against solid particulates

(2) ISO 16602 — Protective clothing for chemical exposure

(3) ISO 17491 — Chemical protective clothing test methods

(4) EN 943-1 / EN 943-2 — Gas-tight chemical protective suits

(5) ASTM F739 — Resistance of protective clothing materials to permeation

(6) ASTM F1001 — Chemical resistance evaluation of protective clothing

(7) NATO AEP-54 — Evaluation of chemical and biological protective equipment

(8) YY/T 0316-2016 — Medical protective equipment quality management reference

(9) GB/Z 42217-2022 — Chemical protective equipment test guidance

(10) GB/T 16294-2010 — Protective clothing performance testing

Technical Parameters

Motion System

ItemTechnical Parameter
Number of motion axes 10 axes
Drive method External motor-driven frame
Head motion Internal lightweight actuators, synchronized
Motion mode Programmable composite motion sequences
Continuous operation time ≤ 6 h

Support and Installation

ItemTechnical Parameter
Support points Hands, face (manikin), feet
Foot fixation Strapped foot boards
Head form support Supported at head base
Interchangeability Full manikin and head form interchangeable in same drive frame

Surface and Skin Material

ItemTechnical Parameter
Skin material Chemical-resistant elastomer
Coverage area Head, neck, wrists, waist
Material property Designed for CB exposure environments
Optional skin Disposable silicone skin

Sampling and Dosimetry

ItemTechnical Parameter
Dosimeter mounting Integrated mounting locations
Sampling method Passive sampling
Compatibility Customer-specified dosimeters supported

Mechanical and Detection Characteristics

ItemTechnical Parameter
Width range 1–5 cm
Stretch range 30%–70%
Detection linearity 0.8–1.0
Detection limit 0.01%–0.1%
Fatigue life ≥ 200.000 cycles

Test Procedures

(1) Inspect the drive system, actuators, and control components

(2) Install the manikin or head form onto the drive frame

(3) Dress the test protective garment or headgear correctly

(4) Install dosimeters at specified locations

(5) Configure motion program and test duration via software

(6) Conduct dynamic exposure testing under controlled conditions

(7) Remove samples and dosimeters following safety procedures


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Simulation Test Dummy
Simulation Test Dummy Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications You can utilize this Simulation Test Dummy across various defense and industr...
Face Mask Tensile Tester
Face Mask Tensile Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The Face Mask Tensile Tester is designed to measure tensile strength, elongation at break, ...
Foam Repeated Compression Tester
Foam Repeated Compression Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Foam repeated compression testing machine will accurately measure the thickness of the test...
Automated blade sharpness tester machine
Automated blade sharpness tester machine Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Quality Control in Medical Device Manufacturing: In medical device manufactur...
Automotive interior material wash resistance testing machine
Automotive interior material wash resistance testing machine Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Primary applications: Assessing scratch resistance of automotive paint and cl...
供应产品

Same products

MMA-120 Handheld Arc Welder
MMA-120 Handheld Arc Welder 卖方: 871183 The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
SHX Series Circulating Fluidized Bed Steam Boiler
SHX Series Circulating Fluidized Bed Steam Boiler 卖方: Hebei Genjux Boiler Co.,Ltd Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler 卖方: Hebei Genjux Boiler Co.,Ltd Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
DHL Series Coal-Fired Steam Boilers
DHL Series Coal-Fired Steam Boilers 卖方: Hebei Genjux Boiler Co.,Ltd Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
SZL Series Biomass Steam Boiler
SZL Series Biomass Steam Boiler 卖方: Hebei Genjux Boiler Co.,Ltd Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...