Automated humidifying bottle tester equipment

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Applications

The humidifier bottle performance tester is mainly used to detect various properties of humidifier bottles, including but not limited to leakage, pressure - resistance, humidification output, and overflow. This instrument can ensure the safety and effectiveness of humidifier bottles during use, and it is an important tool for the quality inspection of medical oxygen humidifiers.

Standards

YY/T 1610 - 2018：Anaesthetic and respiratory equipment - Oxygen humidifiers for medical use

Technical Parameters

Parameter	Specification
Working Range	Usually between 0 and 1000KPa; some models may offer higher pressure options (e.g., 2000KPa or 2500KPa)
Flow Accuracy	±1%, ensuring the accuracy of testing
Power Supply	Generally 220V, 5A, 50Hz
Instrument Operating Voltage	Usually 220V
Air Source Requirements	Adjustable from 0 to 2MPa; the air source needs to be provided by the user
Main Unit Dimensions	Vary depending on the model; e.g., some models: 570×400×200mm (Length×Width×Height)
Other Functions	Some advanced-model humidifier bottle performance testers may have features like micro-computer control, large touch-screen display, Chinese menu settings, digital preset test flow, and printing function (making operation more intuitive and convenient)

Accessoriess

Standard configuration: electronic control unit, testing unit, printer

Test Procedures

1. Pre-test Preparation

Check that the instrument's power supply (220V, 5A, 50Hz) is functioning correctly, and confirm that the external gas source (0-2MPa) is connected and adjustable;

Calibrate the flow sensor (ensuring an accuracy of ±1%), clean the instrument interfaces and tubing to ensure the test pathway is unobstructed.

2. Humidifier Bottle Sample Installation

Remove the humidifier bottle to be tested, check its appearance for damage, and connect the humidifier bottle to the instrument's test tubing according to the interface specifications;

Seal the connection between the humidifier bottle and the instrument, ensuring there is no risk of leakage at the interface (low-pressure gas can be pre-applied to initially verify the seal).

3. Test Parameter Settings

Select the test item (e.g., leak test, pressure test, humidification output test) via the instrument's touchscreen;

According to the YY/T 1610-2018 standard, set the corresponding test parameters: such as pressure test pressure, pressure holding time, test flow rate, etc., and save the parameters after confirmation.

4. Starting the Test

After confirming that the humidifier bottle connection and parameter settings are correct, click the "Start" button, and the instrument will automatically execute the corresponding test procedure (e.g., the leak test will monitor pressure changes, and the pressure test will stably maintain the set pressure);

During the test, the instrument will display pressure, flow rate, and other data in real time.

5. Test Process Monitoring

Observe whether the data on the instrument interface is stable. For leak tests, pay close attention to whether the pressure drops abnormally; for pressure tests, confirm that the humidifier bottle is not deformed or ruptured;

If abnormal data or equipment alarms occur, pause the test immediately and troubleshoot the problem (e.g., interface leakage, unstable gas source).

6. Test Completion and Cleanup

After the test is completed, the instrument will automatically shut down, and the test results will be recorded (e.g., whether the leakage is qualified, whether the pressure resistance value meets the standard);

Disconnect the gas source, loosen the humidifier bottle interface, remove the sample, clean the instrument tubing and interfaces, turn off the equipment power, and prepare the test report.

Other supplier products

	ozone exposure chamber manufacturer	Whats/App: +86 156 1874 6768 Web: standard-groups.com Ozone test chamberApplicationIt is suitable for a series of tests on color fastness and c...
	CE Certified Heat Flow Method Thermal Conductivity Tester for Building Materials	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument complies with and references the following internat...
	Fabric steam shrinkage calibration device	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The G254 Textile Fabric Steam Shrinkage Tester uses a built-in steam generato...
	Aerosol Foams Flammability Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This product complies with "Recommendations on the Transport of Dange...
	Spray Aerosol Ignition Distance Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Conforms to UN Recommendations on the Transportation of Dangerous Good...

供应产品

Same products

	PanEVAP & MVR system	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...
	PanPHE gasketed plate heat exchangers	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ...