Xenon weathering tester with air cooling system
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Applications
Flat-Panel Air-Cooled Xenon Lamp Weathering Test Chamber employs xenon arc lamps capable of simulating the full solar spectrum to reproduce destructive light waves present in various environments. This equipment provides corresponding environmental simulation and accelerated testing for scientific research, product development, and quality control.
The Flat-Panel Air-Cooled Xenon Lamp Weathering Test Chamber can be used for selecting new materials, improving existing materials, or evaluating changes in durability following alterations to material composition. The equipment effectively simulates the changes materials undergo when exposed to sunlight under various environmental conditions.
Standards
GB/T 1865-2009 Paints and Varnishes - Artificial Weathering and Artificial Radiation Exposure - Filtered Xenon Arc Radiation
GB/T 16422.2-2022 Plastics - Laboratory Exposure Test Methods - Part 2: Xenon Arc Lamp
GB/T 2423.24-2013 Environmental Testing of Electrical and Electronic Products - Part 2: Test Methods - Test Sa: Simulation of Solar Radiation at Ground Level
GB/T 12831-1991 Accelerated Weathering Test Method for Vulcanized Rubber Using Artificial Climate (Xenon Lamp)
SAE J2412 Accelerated Xenon Lamp Exposure Test for Automotive Interior Components
SAE J1885-2005 Xenon Lamp Aging Test for Automotive Interior Components
GB/T 14522-2008 Artificial Weathering Test Methods for Plastics, Coatings, and Rubber Materials Used in Mechanical Industry Products
Parameters
| Item | Specifications |
|---|---|
| Irradiation Area | 9000 cm² |
| Sample Tray Size (approx.) | 1000×1200 mm (A4 paper size: 210mm×297mm) |
| Temperature Range | Room temperature ~ 80°C |
| Humidity Range | 30 ~ 98% RH (adjustable) |
| Black Panel Temperature | 63 ~ 95°C±3°C (adjustable) |
| Temperature Fluctuation | ≤±0.5°C |
| Temperature Uniformity | ≤±2.0°C |
| Glass Filter | 4 pieces |
| Xenon Lamp Source | Air-cooled xenon lamp tube |
| Number of Xenon Lamps | 4 pieces |
| Xenon Lamp Power | 1.8 kW per lamp |
| Heating Power | 2.5 kW |
| Humidification Power | 1.0 kW |
| Distance Between Sample Rack and Lamp | 200 ~ 600 mm (adjustable) |
| Lamp Tube Trigger Time | <5s, interval between two triggers >10min |
| Filter | Service life >2000 hours; full-spectrum filter, combining characteristics of infrared, ultraviolet and window glass; made of special optical photolithography silicon glass filter; suitable for indoor and outdoor solar simulation environments; manually replaceable |
| Wavelength | 290 ~ 800 nm |
| Irradiance | 1 ~ 999.9 W/m² (continuously adjustable) |
| Water Spray Cycle (spray time/non-spray time) | 18min/102min or 12min/48min |
| Spray Pressure | 78 ~ 127 kPa |
| Nozzle Hole Diameter | Φ0.8 mm |
| Radiation Intensity | (550±5) W/m², (1000±5) W/m², (1200±5) W/m² (optional) |
| Equipment Dimensions | 1660 × 1720 × 2200 mm |
| Equipment Weight | 500 kg |
Accessories
1. Operating Manual, Circuit Diagram
2. Certificate of Conformity, Warranty Card
3. Precautions, Standard Accessories, Maintenance Guidelines
Test Procedures
1.Power on the instrument and configure test parameters including temperature, humidity, irradiance, and black panel temperature.
2.Place samples on the tray and adjust the distance to the lamps according to the test requirement.
3.Select the desired program sequence or manually configure light, condensation, and spray cycles.
4.Start the test; the chamber will automatically control all environmental variables.
5.Monitor operational curves on the touch screen; adjust parameters if needed.
6.Save or export test data via RS-232/RS-485 interface.
7.At the end of the test, carefully remove samples and clean the tray and chamber as required.
在线联系供应商
Other supplier products
 |
Full Notch Creep Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com This testing machine is used to test the environmental stress cracking performance of plast... |
 |
AATCC 199 microfiber shedding | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Fabric Fiber Shedding Degree Tester (Friction) is an instrument used to e... |
 |
Limiting Oxygen Index Tester Manufacturer in China | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Features Imported sensors Imported Paramag... |
 |
Electrode Plate Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Electrode Plate Resistance Tester integrates high-precision pressure control with thick... |
 |
Mask respiratory resistance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Mask & Respirator Breathing Resistance Tester Respirator Breathing Resistance Tester i... |
Same products
 |
卖方: 868983 | Common Rail Injector Valve F00R J01 334 Injector Valve Set F00V C01 361 Injector Valve Set F00V... | |
 |
卖方: 868983 | Common Rail Injector Valve F 00V C01 371 Injector Valve Set F00V C01 310 Injector Valve Set F00... | |
 |
卖方: 868983 | Common Rail Injector Valve F 00V C01 365 Injector Valve Set F00V C01 303 Injector Valve Set F... | |
 |
卖方: 868983 | Common Rail Injector Valve F 00V C01 329 Injector Valve Set F00V C01 054 Injector Valve Set F... | |
 |
Common Rail Injector Valve F 00V C01 325 | 卖方: 868983 | Common Rail Injector Valve F 00V C01 325 Injector Valve Set F00V C01 044 Injector Valve Set F... |
