Advanced Jet Fuel Performance Test Equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The system supports compliance with international and domestic standards for aviation fuel system testing:
FIRE TEST HANDBOOK: Chapter 12 – Material and component fire testing methods.
ISO 8217 – Aviation turbine fuel specifications.
ISO 11170 – Aircraft fuel pump performance testing.
ASTM D1655 – Aviation turbine fuel standards.
ASTM D3241 – Fuel combustion performance and low-temperature testing.
SAE AS22771 – Aviation engine fuel system component testing.
SAE AS1241 – Fuel pump performance and durability tests.
FAR Part 33 – Aircraft engine airworthiness, including fuel system design and testing.
FAR Part 23 / Part 25 Appendix F – Fire resistance and performance requirements for fuel systems in transport and general aviation.
DEF STAN 91-091 – UK Defense fuel system performance testing.
EUROCAE ED-79 / ED-79A – Aircraft engine fuel system certification and testing.
BSS Series (e.g., BSS 7220) – Fuel system material flammability and compatibility evaluation.
Parameters
| Parameter Category | Details |
|---|---|
| Dimensions | 1500 mm (W) × 1800 mm (H) × 900 mm (D) |
| Weight | 150 kg |
| Fuel Requirement | Aviation kerosene |
| Compressed Air Requirement | ≥ 120 PSI |
| Power Supply | 220 V, 10 A |
| Operating Temperature | 10°C – 35°C |
| Sample Mounting | Horizontal and vertical installation supported |
Features
Burner cone made from corrosion-resistant, high-temperature alloy.
NexGen Aviation Fuel Burner includes diffuser, fuel nozzle, igniter, fuel rail, mounting bracket, ventilation duct, housing, silencer, and acoustic barrier.
Equipped with fuel pressure gauge, fuel solenoid valve, fuel temperature sensor, air regulator, and air temperature sensor.
Fuel and air temperature control baths (≥ 2 × 0.14 m³) maintain stable combustion conditions.
Adjustable fuel nozzle and air pressure allow compliance with multiple test standards.
Insulation blankets cover fuel lines and burner body for safety and heat containment.
Supports modular NexGen burner system units for flexibility.
Heavy-duty steel frame supports horizontal and vertical sample installation.
Calibration employs seven 1.6 mm diameter, ceramic-coated, metal-sheathed, grounded K-type thermocouples (AWG 30. 0.0507 mm² cross-section, 361 Ω/km), mounted on an angle-iron thermocouple comb.
Heat flux sensors with cooling system, mounted on fixed supports for accurate measurement.
Accessories
NexGen Aviation Fuel Burner with full assembly
Fuel and air temperature control baths
Fuel solenoid valve and pressure gauge
Igniter assembly
Adjustable fuel nozzle
Insulation blankets and acoustic silencer
Heavy-duty steel mounting frame
Thermocouple comb for calibration
Heat flux sensors with cooling system
Test Procedures
Ensure the installation area is clear and safe.
Connect the system to a 220 V, 10 A power supply.
Supply aviation kerosene fuel and compressed air ≥ 120 PSI.
Mount the test sample securely on the horizontal or vertical frame.
Apply insulation blankets to fuel lines and burner housing.
Adjust fuel nozzle and air pressure according to the selected test standard.
Activate the igniter and NexGen fuel burner.
Monitor fuel flow, air pressure, flame temperature, and heat flux using sensors.
Conduct automated combustion tests on propulsion components.
Record all data for compliance reporting and analysis.
Shut off fuel and air supply and allow the system to cool before sample removal.
Maintenance Information
Inspect the burner cone, fuel nozzle, and igniter for corrosion or wear before each test.
Check fuel and air lines for blockages or leaks.
Periodically calibrate thermocouples and heat flux sensors.
Clean insulation blankets and acoustic components as needed.
Replace any worn or damaged safety components immediately to maintain operational safety.
在线联系供应商
Other supplier products
 |
Heat Flow Meter for Thermal Insulation Materials | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Heat Flow Meter for Thermal Insulation Materials is a precision instrument designed to ... |
 |
Universal Abrasion Resistance Tester，abrasion tester with software integration | Whats/App: +86 156 1874 6768 Web: standard-groups.com The instrument can be used to flat grinding, mill grinding, edge grinding, folding grinding... |
 |
STD Battery short-circuit tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Battery Short-Circuit Tester is designed for external short-circuit safety testing of l... |
 |
Laboratory Air Jet Erosion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The Air Jet Erosion Tester complies with internationally recognized erosion test... |
 |
20L spherical explosion tester for ASTM E1226 dust explosion testing | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM E1226:Standard Test Method for Minimum Ignition Energy of Dus... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
