IEC / ISO Standard Halogen Acid Gas Tester for Cables
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The test apparatus is designed in accordance with the following international and national standards:
(1) GB/T 17650 – Determination of the Total Amount of Halogen Acid Gas Released During Combustion of Electric Cables
(2) IEC 60754-1 – Test on Gases Evolved During Combustion of Materials from Cables – Part 1: Determination of the Amount of Halogen Acid Gas
(3) IEC 60754-2 – Test on Gases Evolved During Combustion of Materials from Cables – Part 2: Determination of Acidity (by pH Measurement) and Conductivity
Parameters
| Item | Specification |
|---|---|
| Tube Furnace Heating Length | 600 mm |
| Maximum Heating Temperature | Up to 950 °C with thermal equilibrium |
| Temperature Measurement Range | 0–1100 °C |
| Temperature Sensor | High-temperature K-type thermocouple |
| Temperature Accuracy | ±0.1 °C |
| Quartz Tube | Heat-resistant quartz, thickness ≥ 2 mm |
| Carrier Gas | Compressed air |
| Equipment Dimensions | 1500 (W) × 450 (D) × 400 (H) mm |
| Control Cabinet Dimensions | 500 (W) × 400 (D) × 250 (H) mm |
| Power Supply | AC 220 V, 16 A |
| Weight | Approx. 80 kg |
Features
Integrated structural design places the specimen guide tube and tube furnace on the same plane, minimizing positional deviation and improving glassware sealing performance.
Independent control cabinet enhances operational convenience and flexible equipment layout.
Tube furnace heating system adopts a temperature control module combined with a power regulator and PID control to ensure uniform and stable temperature rise.
Protective enclosure with perforated structure improves heat dissipation while protecting the furnace body.
Heat-resistant quartz tube is used for both gas transmission and specimen heating, with ground joints to enhance sealing performance.
Ceramic combustion boat is driven by a strong magnetic mechanism and transmission rod, ensuring stable and precise movement of specimens into the furnace core zone.
Lead screw transmission mechanism enables accurate positioning and smooth operation of the traction tube, reducing the risk of quartz tube damage caused by manual operation.
Imported precision rotameter controls carrier gas flow, combined with branded pressure gauge and pressure regulator to ensure stable airflow.
Dual filter columns filled with activated carbon and color-changing silica gel are used to purify and dry the carrier gas.
PLC and touchscreen control system enables intelligent temperature regulation and improved furnace temperature accuracy.
Built-in test programs for total halogen acid gas, conductivity, pH value, and quartz tube cleaning, with stored standard reference values.
Supplied with complete testing accessories including washing bottles, beakers, graduated cylinders, and magnetic stirrers.
High-quality pH meter and conductivity meter are included for accurate measurement of solution acidity and conductivity.
Accessories
(1) Heat-resistant quartz tube
(2) Ceramic combustion boat
(3) Precision rotameter
(4) Activated carbon filter column
(5) Color-changing silica gel filter column
(6) Glass washing bottles
(7) Beakers and graduated cylinders
(8) Magnetic stirrer
(9) pH meter
(10) Conductivity meter
Test Procedures
Prepare the cable specimen according to the relevant standard requirements and place it in the ceramic combustion boat.
Insert the combustion boat into the quartz tube and position it outside the furnace heating zone.
Set the target furnace temperature according to the selected standard (800 °C for IEC 60754-1 or 950 °C for IEC 60754-2).
Start the carrier gas flow and ensure stable airflow through the system.
Move the combustion boat into the furnace core zone using the magnetic transmission mechanism.
Collect the combustion gases through the absorption system.
Measure the total halogen acid gas volume, pH value, and electrical conductivity according to the selected test method.
Complete the test and perform the quartz tube cleaning procedure using the built-in program.
Maintenance Information
Regular inspection of the quartz tube, sealing joints, and gas pipelines is recommended to ensure reliable test results. The filter materials in the purification columns should be replaced periodically based on usage conditions. Temperature calibration of the thermocouple and verification of pH and conductivity meters should be conducted according to laboratory quality management requirements. After each test, the quartz tube and glassware should be thoroughly cleaned to avoid cross-contamination.
在线联系供应商
Other supplier products
 |
Oil Separator Filtration and Separation Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Test System SPT for testing of separator, especially for blow-by oil mist sep... |
 |
Large - Scale Bending Tester STD - FB2 - L | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheLarge Bending Tester accurately and quickly measures factors related to curvatures in sm... |
 |
Custom five-finger scratch testing system | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Five-Finger Scratch Tester is suitable for testing automotive interior ma... |
 |
Computer controlled memory impact testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Computer controlled memory impact testing machine is mainly used for hard plastics, reinfor... |
 |
Small Solar Simulator Manufacturer | IEC 60904-9 PV Testing Equipment | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) IEC 60904-9 – Photovoltaic Devices: Requirements for Sol... |
Same products
 |
Laser Cutting Machines | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
