Anti-rust salt fog chamber

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

The chamber is designed to comply with international and domestic corrosion testing standards, including but not limited to:

GB/T 2423.17-2008 – Environmental Testing for Electric and Electronic Products, Salt Spray Test Method

GB/T 10125-2012 – Salt Spray Test

IEC 61701-2011 – Salt Mist Corrosion Testing of Photovoltaic Modules

ISO 9227-2017 – Corrosion Tests in Artificially Created Salt Atmospheres

Parameters

Item	Technical Parameter
Chamber Volume	Approx. 3.8 m³
Internal Dimensions	1200 × 1600 × 2500 mm (W×H×D), excluding sloped top height
External Dimensions	2000 × 2400 × 2800 mm (W×H×D), excluding control cabinet
Control Cabinet Size	600 × 1500 × 1000 mm (W×H×D)
Solution Tank Size	600 × 600 × 1000 mm (L×W×H)
Weight	Approx. 1000 kg
Base Load Capacity	Approx. 200 kg
Noise Level	≤70 dB (1 m in front, 1.2 m above ground)
Max Power	26 kW
Max Current	60 A
Power Supply	AC 380V, Three-phase Four-wire + Protective Ground ±10%, 50±0.5 Hz
Temperature Range	RT – 55℃
Pressure Tank Temperature	RT – 63℃
Relative Humidity	30 – 95% RH
Relative Humidity Deviation	+2%, -3%
Temperature Resolution	0.1℃
Temperature Deviation	±1℃
Temperature Uniformity	≤2℃
Temperature Fluctuation	≤±1℃
Salt Spray Deviation	≤±1%
Spray Rate	1–2 ml/80 cm³
pH Value	6.5 – 7.2
Spray/Static Time	1 min – 9999 h, programmable cycles
Heating Rate	Chamber RT→50℃ ≤60 min; Tank RT→63℃ ≤60 min
Sample Capacity	At least 2 modules (2000×1000×38 mm)

Features

Composite cyclic design combining salt spray and wet-heat environment for realistic corrosion simulation.

Programmable cycles allow customization of spray time, static time, and temperature-humidity conditions.

SUS304 stainless steel inner chamber ensures corrosion resistance and easy cleaning.

Precise control of solution concentration and pH, with uniform salt spray distribution (deviation ≤±1%).

High-precision temperature and humidity control: temperature fluctuation ≤±1℃, humidity deviation ±2–3%.

Integrated PID intelligent control with user-friendly interface for programmable cycles.

Eco-friendly design with rapid heating for spray and pressure tank systems.

High power (26 kW) ensures continuous, efficient operation.

Accessories

Standard Configuration: Salt spray chamber main body (inner chamber, pressure tank, circulation spray system, heating system, control system)

Standard Configuration: Control cabinet with PID program control for real-time monitoring

Standard Configuration: Sample holder accommodating at least 2 modules (2000×1000×38 mm)

Consumables: Sodium chloride (chemical/analytical grade) for preparing 5% ±0.1% salt solution

Consumables: Deionized/distilled water for solution preparation

Consumables: Spray nozzles (laboratory-grade, multi-direction adjustable)

Optional: Data acquisition system for recording spray time, temperature-humidity curves, and cycles

Test Procedures

Sample Preparation: Clean and dry samples, place securely on sample holder.

Solution Preparation: Prepare 5% NaCl solution, pH 6.5–7.2. temperature 20±2℃.

Salt Spray Exposure: Set chamber temperature 15–35℃, spray for 2 hours.

Wet-Heat Storage: Transfer samples to wet-heat chamber, 40±2℃, 90±3% RH, 20–22 hours.

Cycle Repetition: Repeat salt spray + wet-heat cycle 3 times.

Rinse and Dry: Rinse with water, dry at 55℃ for 1 hour.

Room Temperature Storage: Store at 23±2℃, 45–55% RH for 1–2 hours.

Data Recording: Record temperature-humidity curves, cycle counts, and sample conditions.

Other supplier products

	ASTM D2303 tracking index tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The tester complies with the following national, industry, and international sta...
	Dry Sand Rubber Wheel Abrasion Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machi...
	Fire-Resistance Cable Burning Test Apparatus,Accurate Fireproof Measurement for Wire Insulation	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Fire-Resistance Cable Burning Test Apparatus (Cable Fire Integrity Tester) is designed ...
	Reciprocating Friction and Wear Testing Machine	Applicable Standards ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to...
	STD IPX7 Machine Waterproof Test Chamber	Product Introduction Test the product waterproof performance in the soaking environment (water depth 1 meters). Through the test ,check whether t...

供应产品

Same products

	Surface adhesion testing equipment factory price	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards JIS L 1066 (Testing Methods fo...
	Continuous load scratch resistance tester manufacturer	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO DIS 12137-2 (Plastics &mda...
	High precision continuous load surface tester	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for...
	Multi-function surface performance test system	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for...
	Laboratory tribology research equipment	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for...