Pin-on-Disc Friction and Wear Test Equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
GB/T 3960-2016 Plastics – Determination of Sliding Wear Properties
ASTM G99 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G133 Standard Test Method for Linearly Reciprocating Pin-on-Flat Sliding Wear
ISO 20502 Coating Scratch Test
DIN 50324 Friction and Wear Test Standard
Parameters
| Parameter | Specification |
|---|---|
| Test Load Range | 30–1000 g (weight loading), 10–200 N (automatic); accuracy 0.2% F.S. |
| Sample Table Speed | 5–2800 rpm, continuously adjustable |
| Friction Diameter | Φ3–Φ50 mm, adjustable |
| Friction Force Measurement | ≤100 N |
| Power Supply | 210–235 V, 50–60 Hz, 2500 W |
| Workbench Size | 1800 × 750 × 800 mm (user-supplied) |
Features
Supports ball-on-disc and pin-on-disc friction pairs for versatile testing.
Wide load and adjustable speed range for various materials and coatings.
Automatic measurement of friction coefficient, wear depth, and wear resistance with real-time display.
Automatic stop protection for safe operation.
High measurement accuracy, suitable for research, quality control, and industrial applications.
Accessories
| Accessory | Specification / Use |
|---|---|
| Friction Pairs | Ball-on-disc, pin-on-disc; replaceable per experimental requirements |
| Sample Fixtures | Secure samples of different sizes and shapes |
| Data Acquisition Software | Real-time acquisition of friction force, wear depth, and friction coefficient |
| Power Cable | Input 210–235 V, 50–60 Hz |
| Weight Set | For manual loading of test force |
Test Principle
The tester applies adjustable load via a ball-on-disc or pin-on-disc friction pair while rotating the sample table. Friction force and friction coefficient are measured in real time, and wear depth is recorded by sensors. Combined with load and speed data, the instrument analyzes material surface wear resistance. Data are automatically collected and experimental curves generated, enabling high-precision friction and wear evaluation.
Operation Instructions
Install the sample and secure it in the fixture.
Set the friction mode, test load, rotation speed, and friction diameter.
Start the test; the instrument automatically operates and displays friction force and wear depth in real time.
Do not touch rotating components during testing; ensure safety.
Save data after testing and turn off the instrument for cleaning.
Experimental Flow
Sample Installation: Secure the sample in the friction pair fixture.
Parameter Setting: Choose ball-on-disc or pin-on-disc mode; set load, speed, and friction diameter.
Start Test: The instrument automatically performs the test and records friction force and wear depth.
Data Monitoring: Observe friction force curves and wear changes in real time.
Data Processing: Generate friction coefficient, wear volume, and wear resistance analysis reports after the test.
Sample Replacement: Clean the fixture and replace the sample for the next experiment.
在线联系供应商
Other supplier products
 |
Torch and Grit particle tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can use the apparatus in the following scenarios: Battery housing materia... |
 |
Liquid Spontaneous ignition point tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description complies with GB/T 21860-2008 “Test Method for Autoignition Temp... |
 |
Oxidation Induction Phase Analysis Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Differential Scanning Calorimeter DSC is designed to determine the inner heat transition re... |
 |
Automated thermal property analyzer for high-temperature materials | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for: Scientific research laboratories studying thermal... |
 |
High Temperature Dielectric Strength Oil Heated Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com High temperature voltage breakdown tester (oil heating) is mainly suitable for solid insula... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
