Benchtop Multi-Function Friction and Wear Test Equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The tester is designed to support test methods referenced in the following standards:
ASTM G99 (Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus)
ISO 20808 (Fine ceramics — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disk method)
GB/T 3142 (Determination of load-carrying capacity of lubricants — Four-ball method)
SH/T 0189 (Test method for anti-wear properties of lubricating oils — Four-ball method)
Parameters
| Item | Description |
|---|---|
| Platform Structure | Rigid structural design for stable and repeatable tribological testing |
| Environmental Control | Temperature: −50 °C to 1000 °C; Humidity: 5–95 % RH; optional corrosion and other environmental chambers |
| Interchangeable Test Modules | Quickly replaceable modules including rotational, reciprocating, and ring-on-block modules |
| Dual Force Sensor System | Two sensors can be installed simultaneously; force range from mN to 3000 N |
| X-axis Platform | High-precision automated X-stage with 150 mm travel for test module positioning |
| Data Acquisition & Motion Controller | High-speed, low-noise, multi-channel controller with fast feedback and data sampling rate up to 200 kHz |
Features
Standard test configurations including ball-on-disk (pin-on-disk), high-speed reciprocating motion, and ring-on-block
Wide loading capability from mN to 3000 N covering nano to macro tribological testing
New-generation dual force sensor technology enabling seamless force range switching
Closed-loop servo loading control for high stability and repeatability
Broad temperature testing capability from −60 °C to 1000 °C
Modular design with fast and easy module replacement
Fully automated X-axis positioning platform for efficient and repeatable testing
Accessories
Rotational test module (ball-on-disk / pin-on-disk)
High-speed reciprocating test module
Ring-on-block test module
Environmental chambers (temperature, humidity, corrosion)
Interchangeable force sensors
Test Procedures
Select the appropriate test module according to the required test method.
Install the test specimen and counter body securely on the platform.
Configure test parameters including load, speed, motion type, temperature, and environment.
Perform sensor verification and system calibration before testing.
Start the test and monitor friction force and normal load signals in real time.
Complete the test according to the predefined duration or wear criteria.
Export test data for analysis and reporting.
Maintenance Information
Clean test modules, fixtures, and contact components after each test.
Periodically calibrate force sensors and motion systems to maintain accuracy.
Inspect mechanical components and guide systems regularly to ensure smooth operation.
Maintain environmental chambers according to operating conditions and usage frequency.
在线联系供应商
Other supplier products
 |
Athletic field surfacing flame retardant device | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Feature Flame Retardant Tester is designed for testing plastic runway surfac... |
 |
PV-Panels Testing Devices | Whats/App: +86 156 1874 6768 Web: standard-groups.com Features and Benefits 1. The capacity and performance of the workroom can be adjusted acco... |
 |
Floor Material Burning Performance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Thefloor coverings flammability testeris used to tester a variety of flooring materials, su... |
 |
Torque Rheometers | Whats/App: +86 156 1874 6768 Web: standard-groups.com Torque rheometer is ideal for studying polymer flow, deformation, plasticization, thermal s... |
 |
Flooring Materials Abrasion Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D3884(Abrasion Resistance of Textile Fabrics) ISO 5470-1(Rubber or Plastics... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
