Compact Benchtop Friction and Wear Test Equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The tester is designed to support test methods referenced in the following standards:
ASTM G99 (Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus)
ISO 20808 (Fine ceramics — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disk method)
GB/T 3142 (Determination of load-carrying capacity of lubricants — Four-ball method)
SH/T 0189 (Test method for anti-wear properties of lubricating oils — Four-ball method)
Parameters
| Item | Description |
|---|---|
| Platform | Open-platform design for easy access and operation |
| Interchangeable Test Modules | Quickly replaceable modules enabling multiple tests on the same platform (rotational, reciprocating, etc.) |
| Force Sensors | High-resolution force sensors with multiple measurement ranges; maximum load up to 200 N |
| XY Stage | High-precision automated XY platform with automatic test radius adjustment; supports integration of 3D optical surface profiling |
| Maximum Temperature | Up to 1000 °C |
| XY Travel Range | 150 mm × 150 mm |
Features
Standard test configurations including ball-on-disk (pin-on-disk) and high-speed reciprocating motion
Loading range from mN up to 200 N, suitable for micro- to macro-scale tribological testing
Integrated 3D optical surface profiling capability
Closed-loop servo loading control for stable and repeatable measurements
High-temperature testing capability up to 1000 °C
Support for rotational, reciprocating, and ring-on-block test modes
Modular design with fast replacement of test modules
Fully automated XY positioning platform (150 mm × 150 mm)
Accessories
Ball-on-disk / pin-on-disk test module
High-speed reciprocating test module
Ring-on-block test module
Interchangeable force sensors
3D optical surface profiling module
Test Procedures
Select and install the appropriate test module according to the test requirement.
Mount the specimen and counter body securely on the test platform.
Set test parameters including load, speed, motion type, temperature, and test radius.
Perform system checks and sensor verification prior to testing.
Start the automated test sequence and monitor friction and load signals.
Complete the test based on predefined conditions or test duration.
Conduct surface morphology measurement and export test data for analysis.
Maintenance Information
Clean test modules, fixtures, and contact components after each test.
Regularly inspect and calibrate force sensors to maintain measurement accuracy.
Check mechanical components and motion stages periodically for smooth operation.
Maintain environmental and heating components according to usage conditions.
在线联系供应商
Other supplier products
 |
High Power 7.5kW Xenon Weathering Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications SUGA GX75 7.5kW Xenon Weather Meter is designed to artificially reproduce ind... |
 |
Appliance Stability meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction The device conforms to GB4706-1 Article 20.1. IEC60335-1 Article 20.1... |
 |
Low-Load Wear Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Low-Load Wear Testing Machine is specifically designed to measure wear behavior under e... |
 |
Catheter Power Injection Flow and Pressure Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Catheter Power Injection Flow and Pressure Tester is designed to evaluate the flow and ... |
 |
Liquid Sustained Combustion Tester，20L Spherical Explosion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This product complies with "Recommendations on the Transport of Dange... |
Same products
 |
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 | 卖方: 863048 | 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，... |
 |
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 | 卖方: 863048 | 迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | 卖方: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | 卖方: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
