Seat Belt Test Dummy
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Crash Test Dummy for Seatbelt Testing is a high-precision anthropomorphic test device designed specifically for dynamic evaluation and development of automotive seatbelt systems. It represents a 50th percentile adult male, with physical mass distribution and body dimensions accurately modeled. Constructed from metal, fiberglass, and polyurethane materials, it realistically simulates the skeletal and muscular responses of the human body under dynamic seatbelt loading conditions.
Application
You can use this dummy for:
(1) Dynamic performance verification of automotive seatbelt systems;
(2) Development, optimization, and validation of vehicle seats and occupant restraint systems;
(3) Frontal and oblique collision simulation experiments;
(4) Seatbelt design evaluation and occupant injury assessment;
(5) Regulatory compliance testing according to national and international standards.
Standards
This dummy complies with the following standards:
(1) GB 14166-2013 Motor Vehicle Occupant Restraint System Crash Test Dummy;
(2) ECE R16 Uniform Provisions for Vehicle Seatbelt and Restraint System Certification;
(3) ISO 15830 Road Vehicles – Side Impact Dummy for Restraint System Evaluation.
Parameters
Dimensional Parameters
| No. | Measurement Parameter | Dimension (mm) |
|---|---|---|
| 1 | Head Width | 160 ± 5 |
| 2 | Shoulder Width | 465 ± 5 |
| 3 | Hip Position Torso Width | 120 ± 5 |
| 4 | Hip Width | 340 ± 5 |
| 5 | Knee Center to Floor | 510 ± 10 |
| 6 | Hip Center to Floor | 990 ± 10 |
| 7 | Torso Upper Plane to Floor | 1470 ± 10 |
| 8 | Head Bolt Center to Floor | 1600 ± 10 |
| 9 | Head Top to Floor | 1750 ± 10 |
| 10 | T-Point Height | 720 ± 5 |
| 11 | P-Point Height | 320 ± 5 |
Mass Distribution
| No. | Component | Mass (kg) |
|---|---|---|
| 1 | Head Assembly | 4.0 ± 0.2 |
| 2 | Neck Assembly | 0.7 ± 0.1 |
| 3 | Torso Assembly | 29.7 ± 1.0 |
| 4 | Thigh Assembly (L/R) | 12.3 ± 0.3 |
| 5 | Lower Leg Assembly | 8.4 ± 0.3 |
| 6 | Hip Joint | 3.1 ± 0.1 |
| 7 | Knee Joint Assembly | 1.1 ± 0.1 |
| 8 | Outer Jacket + Chest Pad | 1.1 ± 0.1 |
| 9 | Total Mass (including calibration) | 75.5 ± 1.0 |
Sensor Configuration
| Installation Location | Sensor Type | Channels |
|---|---|---|
| Head | Accelerometer | 3 |
| Chest | Cable Displacement Sensor | 1 |
| Pelvis | Cable Displacement Sensor | 2 |
在线联系供应商
Other supplier products
 |
Small Solar Simulator | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com TheSmall Solar Simulatoris a precision laboratory device designed for the con... |
 |
Manufacturer of Medical needle toughness tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Medical Needle Toughness Tester is designed to evaluate the mechanical st... |
 |
Fabric bending rigidity tester for quality assurance | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Pure Bending Tester analyzes hand movements-referred to as "bending"-performed by artis... |
 |
Automated Freezing/Pour Point Chiller Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: The automatic freezing point pouring point Freezing point tester is ... |
 |
Goggles Puncture Resistance Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable standards: GB 811-2010 ECE R22.05 EN1077 Purpose It is to make a certain ... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
