50th Percentile Male Crash Test Dummy
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The 50th Percentile Male Crash Test Dummy is a biomechanical surrogate designed for frontal automotive crash testing. It is based on anthropometric data, body mass distribution, and joint characteristics of the 50th percentile adult male in European and American populations. The dummy accurately simulates the mechanical response of a medium-sized male occupant during collisions. It is widely used in regulatory testing, NCAP evaluation, and passive safety system development, serving as a core tool for frontal occupant injury assessment.
Application
You can use the 50th Percentile Male Dummy in the following applications:
Frontal occupant protection testing for passenger and commercial vehicles
Seatbelt restraint performance and injury evaluation
Analysis of frontal airbag deployment characteristics and protection effectiveness
Assessment of dashboard, steering, and pedal impacts on occupants
NCAP frontal crash testing for new vehicles
Human impact studies in aerospace, high-speed rail, military, and special equipment
Biomechanical research in universities and third-party testing institutions
Standards
The dummy conforms to a comprehensive set of standards:
(1) GB 11551 – Protection of occupants in frontal collisions
(2) GB/T 29120 – Anthropomorphic test device general technical requirements
(3) GB/T 24550 – Frontal crash test methods
(4) UN R94 – Frontal crash occupant protection
(5) UN R137 – Full-width rigid barrier frontal collision
(6) ISO 6487 – Road vehicles — Measurement techniques in impact tests
(7) SAE J211 – Instrumentation for impact tests
(8) Euro NCAP – Frontal crash test protocols
(9) C-NCAP – Frontal crash test protocols
(10) US NCAP / IIHS – Frontal crash test protocols
(11) FMVSS 208 – Occupant crash protection
(12) J-NCAP / K-NCAP / ASEAN NCAP / Latin NCAP / ANCAP – Frontal crash test protocols
Parameters
Dimensions
| No. | Name | Dimension (mm) |
|---|---|---|
| A | Seated Height | 883.9 ±5.1 |
| B | Shoulder Pivot Height | 513.1 ±7.6 |
| C | H-Point Height (Reference) | 86.4 ±2.5 |
| D | H-Point to Seatback (Reference) | 137.2 ±2.5 |
| E | Shoulder Pivot to Backplane | 88.9 ±5.1 |
| F | Thigh Thickness | 147.3 ±7.6 |
| G | Elbow to Wrist | 297.2 ±7.6 |
| H | Head Rear to Backplane | 43.2 ±2.5 |
| I | Shoulder to Elbow | 337.8 ±7.6 |
| J | Elbow to Seat Plane | 200.7 ±10.2 |
| K | Knee Front to Backplane | 591.8 ±12.7 |
| L | Foot to Seat Plane | 442.0 ±12.7 |
| M | Knee Pivot to Floor | 492.8 ±7.6 |
| O | Chest Thickness (No Skin) | 221.0 ±7.6 |
| P | Foot Length | 259.1 ±7.6 |
| U | Hip Width | 363.2 ±7.6 |
| V | Shoulder Width | 429.3 ±7.6 |
| W | Foot Width | 99.1 ±7.6 |
| Y | Chest Circumference | 985.5 ±15.2 |
| Z | Waist Circumference | 850.9 ±15.2 |
| AA | Chest Reference Position | 431.8 ±2.5 |
| BB | Waist Reference Position | 228.6 ±2.5 |
Mass Distribution
| Component | Mass (kg) |
|---|---|
| Head Assembly | 4.54 ±0.05 |
| Neck Assembly | 1.54 ±0.05 |
| Upper Torso with Chest Skin | 17.19 ±0.36 |
| Lower Torso | 23.04 ±0.36 |
| Thigh (L/R) | 5.99 ±0.09 |
| Lower Leg (L/R, incl. feet) | 5.45 ±0.14 |
| Upper Arm (L/R) | 2.00 ±0.10 |
| Lower Arm/Hand (L/R) | 2.27 ±0.09 |
| Total Dummy Weight | 77.70 ±1.18 |
Sensor Configuration
| Location | Sensor Type | Channels | Requirement |
|---|---|---|---|
| Head | Accelerometer | 3x1 | ★★★ |
| Head | Angular Rate Sensor | 3x1 | ★ |
| Upper Neck | 6-axis Load Cell | 1x6 | ★★★ |
| Lower Neck | 6-axis Load Cell | 1x6 | ★ |
| Chest | Accelerometer | 3x1 | ★★ |
| Chest | Displacement Sensor | 1x1 | ★★★ |
| Thoracic Spine | 5-axis Load Cell | 1x5 | ★ |
| Lumbar | 6-axis Load Cell | 1x6 | ★ |
| Pelvis | Accelerometer | 3x1 | ★ |
| Lower Thigh | 6-axis Load Cell | 2x6 | ★★ |
| Lower Thigh | Single-axis Force Sensor | 2x1 | ★★★ |
| Knee | Displacement Sensor | 2x1 | ★★★ |
| Knee | 2-axis Force Sensor | 2x2 | ★ |
| Upper Tibia | 4-axis Force Sensor | 2x4 | ★★ |
| Lower Tibia | 4-axis Force Sensor | 2x4 | ★★ |
| Foot | Accelerometer | 2x2 | ★ |
在线联系供应商
Other supplier products
 |
Catheter Residual Vacuum Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The catheter residual vacuum tester is mainly used to determine the physical ... |
 |
Bending Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength ... |
 |
Intramedullary Nails Internal-fixation Pull-out Force Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM F543: Standard specification for metallic medical bone screws (dynamic loadi... |
 |
Oil Filter Test Bench Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The test bench is mainly used to test the differential pressure-flow characte... |
 |
Humidity heat chamber for pv modules | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Heat Test Chamber is suitable for: Damp-heat performance testing of ... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
