SO2 H2S HCL Corrosion Test Equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
TheSO₂ H₂S HCl Corrosion Test Equipmentis designed to simulate corrosive environments using noxious gases such as sulfur dioxide (SO₂), hydrogen sulfide (H₂S), and hydrogen chloride (HCl). You can use this chamber to evaluate the corrosion resistance of materials, components, and assemblies under controlled temperature, humidity, and gas concentration conditions, ensuring product durability and compliance with international standards.
Standards
Carry out various sulfur dioxide gas corrosion tests in accordance with GB10587 - 89. GB2423.9 - 93. GJB150. QC/T417.1 - 2001 and equivalent standards such as IEC, DIN, MIL, ASTM.
IEC 60068-2-42
Environmental Requirements
1. Power supply: AC380V 3Φ 10KVA 0HZ 2. Allowable voltage range: ±5% of the rated value 3. Maximum load: 6KVA 4. The distance between the chamber and the wall should be greater than 600cm.
Description
Stainless Steel Noxious Gas Corrosion SO2 H2S CO2 HCL Artificial Climate Chamber:
SO2 HCL H2S Noxious Gas Corrosion Environmental Test Chamber reproduce damages by temperature, relative humidity and noxious gas Corrosion to material, components and constructions.
SO2 HCL H2S Noxious Gas Corrosion Environmental Test Chamber can be used to test t SO2. H2S.
SO2 HCL H2S Noxious Gas Corrosion Environmental Test Chamber can be used for single gas tests.
SO2 HCL H2S Noxious Gas Corrosion Environmental Test Chamber are ranging in size from 100Ltier to 1000Liter.
Features
1. The chamber is molded from epoxy fiberglass. Asbestos board is pasted inside the jacket. It is resistant to high temperature and corrosion, lightweight, and has high strength. Both the inner and outer walls of the chamber are smooth and easy to clean.
2. The chamber cover is made of epoxy fiberglass with a top cover temperature of 100 - 200°C to prevent condensed water in the chamber from dripping directly onto the test specimens.
3. Heater: The nickel - chromium alloy heating wire heats from the bottom, forming jacket heating to ensure good temperature uniformity inside the chamber.
4. Humidification method: Humidification by a steam generator.
5. Input methods for sulfur dioxide and hydrogen sulfide: Input from cylinders, and both input and discharge are quantitatively controlled by concentration sensors.
6. Exhaust gas treatment: Install treatment devices for sulfur dioxide and hydrogen sulfide gases. After multi - stage treatment with sodium bicarbonate, the exhaust gas meets the discharge standards (the purification device is external).
Technical Parameters
1. Temperature range: 10 - 55°C
2. Temperature fluctuation: ±0.5°C
3. Temperature uniformity: ±2°C
4. Sulfur dioxide gas concentration: 100ppb - 50000ppb (0.1ppm - 50ppm)
5. Hydrogen sulfide gas concentration: 10ppb - 5000ppb (0.01ppm - 5ppm)
6. Relative humidity: 75±3%
7. Tests with sulfur dioxide, hydrogen sulfide, and mixed gases of sulfur dioxide and hydrogen sulfide can be conducted.
在线联系供应商
Other supplier products
 |
Micro Rapid Closed Cup Flash Point Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Reference Standards： SH/T 0768. SN/T 3077.1. DL/T 1354. ASTM D6450 SN/T 3077.2. ASTM D7094... |
 |
Flame Spread Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The tester is used for flame spread test of protective clothing. It is designed and manufac... |
 |
Big 45°Method Suture Flame Contact Times Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com This instrument is used for testing flame exposure times of flame retardant protective clot... |
 |
ISO 834 Fire Retardant Wood Stack Method Combustion Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The fire retardant wood stack method combustion test device is developed base... |
 |
Benchtop tracking index tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Tracking Tester is suitable for testing the tracking resistance of various... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
