Mullen & G229B Pneumatic Bursting Strength Tester
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Bursting Strength Testeris widely used in textile , leather , paper and other fields. The bursting strength and height of woven, knitted, non-woven fabric, paper or board are measured by air pressure drum. It is the basic equipment for testing physical strength and strength of materials.
Mullen Bursting Strength Tester
Standard
ASTM D3786.AS2001.2.4.BS EN ISO 13938-1.GB/T 7742.ISO 13938-1.JIS L1018/L1093.IWSTM170
Main models
Common models for the C, A
Instrument features
1. the use of Mitsubishi 16-bit industrial-level MCU control, with strong anti-interference ability;
2. Equipped with Putian MT-300K printer, a test report can be printed with the output data.
Technical Parameters
Sensor Type: Pressure Transducer
Indicator Type: Digital Display
Operation Mode: Fully Automatic
Force Units: kPa, psi (lbs/in²), kgf/cm², with unit switching function
Burst Resistance Measurement Range: 250-5600 kPa
Clamp Ring Material: SUS#304 Stainless Steel
Clamp Ring Inner Diameter: Upper and Lower Clamp Rings φ31.5 ± 0.05 mm
Hydraulic Oil: 85% glycerin, 15% distilled water
Pressing Speed: High-Pressure Type 170 ± 10 ml/min
Accuracy: ±0.5%
Automatic Clamping and Release Device, Specimen Holding Force: >690 kPa
Dimensions: (L×W×H) 445 × 425 × 525 mm
Weight: 70 kg
Power: 120 W
Power Supply: 1∮AC220±10%, 50Hz
Standard Configuration: 1 rubber membrane, 1 wrench, 10 calibration sheets, 1 bottle of glycerin.
Optional: 1 air pump
G229B Bursting Strength Tester
Standards
▶ GB/T 7742.1 Textile fabrics bursting properties - Part 1: Determination of bursting strength and expansion ratio;
▶ASTM D3786 Test method for hydraulic bursting strength of textiles: diaphragm type bursting strength test method;
▶BS EN ISO 13938-1 Textile bursting characteristics, Hydraulic method for bursting strength and bursting expansion;
▶BS 3424-6-B Hydraulic method for determining fabric bursting strength;
▶ISO 3303-B/3303.2 Glued or plastic coated fabrics. Determination of tear strength;
▶ISO 2758 Paper. Determination of brittle fracture strength;
▶ISO 3689 Determination of bursting strength after immersion;
▶JIS L1018 Test method for knitted fabric;
▶JIS L1093 Test method for gap strength of textiles;
▶IWS TM170 International Wool Bureau Standard
Scope of application
Digital bursting strength testeris used for the detection of woven, knitted, non-woven fabrics, paper or board about the bursting strength and height.
Instrument features
A. Meet the maximum 100cm2 test area
B. Uniform clamping force, can be applied to all kinds of materials in all directions
C. Support online communication
D. Experimental area can be replaced, suitable for different standards
E. Store 50 custom standards
F. Test results such as: rich burst strength, bursting strength, diaphragm pressure, bursting height, and bursting time; make quality control personnel comprehensively understand the bursting performance of the sample.
G. Security shield automatic detection can automatically correct and exclude the film itself on the results
Instrument Configuration
1. One host
2. A set of the next clip ring (5)
3. Expanded broken film 1 package
4. Silent pump 1 set
5.Glycerine 1 bottle
6.Test rubber film (2 pieces)
7.Mute laboratory air compressor (optional)
Technical Parameters
A. Pressure: air pressure method
B. Measuring range: 0-1000kPa, accuracy: 0.2%
C. lower clip ring: 7.3cm2. 7.8cm2. 10cm2. 50cm2. 100cm2
D. Maximum expansion: 70 ± 0.02mm
E. Pressing rate: 1 ~ 100 kPa / min, speed adjustable
F. Output: print output, display output, real-time color graphics display
G. Power supply: Ac220V 50Hz 2000W
在线联系供应商
Other supplier products
 |
Fabric bending rigidity tester for quality assurance | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Pure Bending Tester analyzes hand movements-referred to as "bending"-performed by artis... |
 |
Heat Storage Performance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Heat Storage Performance Tester provides standardized procedures and controls radiation hea... |
 |
Flooring VOC Emission Testing Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 16000-9(Indoor Air - Determination of Volatile Organic Compounds) ASTM D51... |
 |
Fabric shrinkage tester for clothing manufacturers | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Application It is used to test the dry heat shrinkage performance of tire co... |
 |
Leak Detection System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Tightness and leak testing of technical components and devices; Sealing perf... |
Same products
 |
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 | 卖方: 863048 | 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，... |
 |
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 | 卖方: 863048 | 迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | 卖方: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | 卖方: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
