Vehicle-Level High/Low Temperature and Humidity Test Chamber

Get a quote：

Whats/App: +86 181 0160 0864

TheVehicle-Level High/Low Temperature and Humidity Test Chamberis a large-scale environmental simulation chamber designed to replicate extreme temperature and humidity conditions for full vehicles and automotive components. You can use it to verify the performance reliability of engines, air conditioning systems, electrical components, coatings, and rubber parts under high and low temperature, as well as humid environments. This chamber is essential for automotive research, development, and quality control.

Applications

1. Automotive R&D Testing

Cold Start Test: Verifies engine starting performance at low temperatures (e.g., -40°C), requiring ≤3 successful starts with a start time ≤15 seconds.

Thermal Equilibrium Test: Simulates high-temperature (+60°C) and high-humidity environments to evaluate the stability of air conditioning systems and cooling components.

Material Reliability: Assesses the aging resistance of body coatings and rubber seals under temperature-humidity cycling conditions.

2. Other Applications

Extendable for environmental reliability testing in aerospace, large home appliances, and other industries, supporting composite environment simulation including low atmospheric pressure (1 kPa to atmospheric pressure).

Standards

GB/T 2423.1 Environmental Testing of Electrical and Electronic Products - Part 2: Test Methods - Test A: Low Temperature

GB/T 2423.2 Environmental Testing of Electrical and Electronic Products - Part 2: Test Methods - Test B: High Temperature

GB/T 2423.3 Environmental Testing - Part 2: Test Methods - Test Cab: Constant Humidity and Heat Test

GJB 150.3A Laboratory Environmental Test Methods for Military Equipment - Part 3: High Temperature Test

GJB 150.4A Laboratory Environmental Test Methods for Military Equipment - Part 4: Low Temperature Test

Features

1.Large-Scale Vehicle Testing:

Supports full-size vehicles and engine operation under extreme temperature and humidity conditions.

2.Precise Environmental Control:

Temperature fluctuation ≤±0.5℃, temperature uniformity ≤2℃, and humidity deviation ±5% RH ensures reliable and repeatable results.

3.Cold Start and Heat Balance Simulation:

Allows testing of automotive engines, air conditioning systems, and auxiliary components under simulated real-world conditions.

4.Durability and Reliability Assessment:

Facilitates accelerated aging of coatings, rubber seals, and electrical components under extreme environmental cycles.

5.Flexible Application:

Can be adapted to composite environmental simulations including low-pressure conditions for aerospace or industrial applications.

Parameters

Item	Specifications
Refrigeration System	Capable of maintaining stable internal temperature at -16°C while one 5-ton vehicle (or two 2.5-ton vehicles, total engine displacement 4.0T, maximum power 300kW) is running at 50% rated engine speed.Internal effective dimensions: 10 m × 5 m × 4 m (D × W × H)
Temperature Range	-45°C ~ 90°C
Temperature Fluctuation	≤±0.5°C
Temperature Uniformity	≤2°C
Humidity Range	20% ~ 98% RH
Humidity Deviation	±5%

Accessories

Programmable touchscreen control system

Humidity and temperature sensors

Data acquisition and monitoring software

Vehicle support platforms or wheel locking fixtures

Safety interlocks and alarm systems

Test Procedures

1. 1.Equipment Preparation

Verify chamber structure, power supply, and safety interlocks.

Check water supply and humidity system operation.

Position vehicle(s) securely using support platforms or fixtures.

2. 2.Parameter Configuration

Set desired temperature and humidity ranges.

Program cyclic test schedules for hot, cold, and humid conditions.

Activate data acquisition and monitoring systems.

3.3. Test Execution

Start environmental simulation.

Monitor temperature, humidity, and engine behavior if performing cold start tests.

Record all data automatically via software.

4.4. Test Completion

Gradually return chamber to ambient conditions.

Remove vehicles safely and analyze test data for component reliability and performance.

Other supplier products

	Filter Media Tester G505	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Filter Media Dynamic Filtration Performance Tester is primarily used to assess...
	Automatic Down Filling Tester / Down and Feather Testing Machine	Introduction The loftiness index is one of the important indicators of feather and down quality. It is a concentrated manifestation of the interna...
	Geosynthetics thickness tester丨Thickness Gauge	Scope of application: Used to determine the thickness of various geosynthetic materials under specified pressure and time. The sample is placed on...
	Color fastness tester for ironing sublimation	Getaquote: Whats/App: +86 181 0160 0864 G247B Color fastness tester for ironing sublimation, It is used for the performance test of color fastnes...
	Large diameter blasting test machine ISO 1167	Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurable...

供应产品

Same products

	HDPE高速水冷双壁波纹管生产线	卖方: Shandong HUASU Plastic Technology Co.,Ltd.	机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功...
	PanEVAP & MVR system	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...