Walk-in High Low Temperature Low Pressure Test Chamber
Get a quote：
Whats/App: +86 181 0160 0864
TheWalk-in High/Low Temperature and Low Pressure Test Chamberis a precision environmental simulation instrument designed to replicate high-temperature, low-temperature, and low-pressure composite conditions. You can use it to perform single-parameter or multi-parameter coupled environmental tests on large-scale equipment, ensuring reliability and performance verification under extreme conditions.
Applications
Avionics equipment testing, spacecraft vacuum thermal testing, new energy sectors (high-altitude lithium battery and photovoltaic inverter testing), and electronic equipment stability verification (5G base stations, communication equipment, etc.).
Standards
GB/T 10590-2006 Technical Specifications for High/Low Temperature and Low Pressure Test Chambers
GB/T 2423.25 Environmental Testing for Electrical and Electronic Products. Part 2: Test Methods. Test Z/AM: Combined Low Temperature/Low Pressure Test
GB/T 2423.26 Environmental Testing of Electrical and Electronic Products. Part 2: Test Methods. Test Z/BM: Combined High Temperature/Low Pressure Test
GJB 150.2A Laboratory Environmental Test Methods for Military Equipment. Part 2: Low Pressure (Altitude) Test
GJB 367.2 General Technical Conditions for Military Communication Equipment. Environmental Test Methods
Features
1.Walk-in design accommodates large equipment and multiple test samples simultaneously.
2.Capable of simulating extreme high/low temperatures and low-pressure environments with precise control.
3.Pressure and temperature control systems ensure uniformity and minimal fluctuation for reliable results.
4.Adjustable pressure change rates allow simulation of realistic ascent/descent conditions.
5.Stainless steel chamber construction with sandblasted surface ensures durability and easy maintenance.
6.Multi-parameter coupling allows high fidelity simulation of complex environmental conditions.
Parameters
| Item | Specifications |
|---|---|
| Nominal Internal Volume | 12.1 m³ |
| Chamber Internal Dimensions | 2500 mm (L) × 2300 mm (W) × 2100 mm (H) |
| Chamber Structure | Integral construction required for the equipment chamber |
| Chamber Material | Inner liner made of stainless steel with sandblasted surface treatment |
| Temperature Range | -45°C ~ +130°C (maintainable under both normal pressure and vacuum conditions) |
| Temperature Fluctuation | ≤±0.5°C (under normal pressure) |
| Temperature Uniformity | ≤2°C (under normal pressure) |
| Temperature Deviation | ≤±2°C (under normal pressure) |
| Pressure Range | 101.3 kPa ~ 20 kPa |
| Pressure Change Rate | ≤10 kPa/min (adjustable); from normal pressure to 1 kPa ≤30 min |
| Pressure Recovery Rate | ≤10 kPa/min (adjustable and controllable) |
| Pressure Deviation | ±2 kPa (normal pressure ~ 40 kPa)±5% (40 kPa ~ 4 kPa)±0.1 kPa (4 kPa ~ 1 kPa) |
| Pressure Reduction Time | From normal pressure to 20 kPa ≤30 min |
| Simulated Altitude | ≥10.000 meters |
Accessories
1.Digital temperature and pressure control system
2.Vacuum pump and pressure regulation system
3.Data acquisition and monitoring software
4.Safety interlocks and alarm system
5.Adjustable shelving and mounting fixtures for test samples
Test Procedures
1.1.Equipment Preparation
Verify chamber integrity, power supply, and control system calibration.
Confirm vacuum pump and pressure regulation system functionality.
Prepare test samples and arrange securely inside the chamber.
2. 2.Parameter Setting
Set desired temperature and pressure profiles according to test requirements.
Adjust pressure change rate to simulate ascent or descent conditions.
Enable data logging and monitoring functions.
3. 3.Test Execution
Start the chamber and allow environmental parameters to reach target values.
Monitor temperature and pressure uniformity throughout the test duration.
Record any deviations or alarms for analysis.
4. 4.Test Completion
Gradually return chamber to standard temperature and pressure conditions.
Safely remove test samples and review data for evaluation.
在线联系供应商
Other supplier products
 |
Continuous Load Surface Performance Measurement Instrument | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Continuous Load Surface Performance Measurement Instrument is designed for eva... |
 |
Sponge foam collapsible hardness tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk This machine is used to measure the indentation hardness of porous elastic materia... |
 |
Thin Film Pendulum Impact Tester / ASTM D | Compliance Standards GB/T 8809 ASTM D3420 Main Uses The film pendulum impact tester is mainly used to determine the resistance to pendulum impac... |
 |
Dry heat shrinkage tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The dry heat shrinkage tester is a crucial instrument for testing the dimensional ... |
 |
Smoke Toxicity Test Equipment for Building Materials | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Building material smoke toxicity testing equipment is primarily used to evaluate t... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
