Martindale Abrasion And Pilling Tester
Getaquote:
Whats/App: +86 181 0160 0864
Martindale Abrasion & Pilling Tester To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abrasives at low pressures and in continuously changing directions. The amount of abrasion or pilling is compared against standard parameters.
The unique design of our Martindale abrasion tester allows removal of individual sample holders for examination without lifting the top motion plate. It provides individual counters and parking function, interval time settable and a large touch-screen display. Standard sample holders and 9 and 12kpa Weights are included.
The Martindale abrasion tester is available with 4. 6. 8 or 9 test positions.
Application
(1) Woven and knitted fabrics (cotton, polyester, blends)
(2) Upholstery textiles (sofas, curtains, automotive interiors)
(3) Coated fabrics and artificial leather
(4) Leather materials
(5) Quality control laboratories and third-party testing agencies
Testing Standards:
ISO12947:TextileabrasionresistanceteststandardusingtheMartindalemethodtoevaluatespecimendamage,massloss,andappearancechanges.
ISO5470-2:Abrasionresistancetestforrubberorplastic-coatedfabrics,measuringwearvolumeorrateviatheMartindaleabrasionmachine.
GB/T13775:Textileseawatercolorfastnesstest,assessingcolorchangeofspecimensandstainingofadjacentfabricsafterseawaterimmersion.
GB/T21196:Textilepillingresistancetestusingthecircularlocusmethodtosimulatefriction-inducedpilling.
FZ/T20020:Wooltextileappearanceretentiontestafterwashing,evaluatingdimensionalstability,wrinkling,andaccessorychangespost-wash.
ASTMD4966:Textileabrasionresistancetest(Martindalemethod)forapparelandhomefurnishings.
BS3424-24:Textilewaterspotcolorfastnesstest,ratingcolorchangeandstainingafterwaterimmersion.
IWTODRAFTTM40:WooltextiledimensionalstabilitytestusingtheMartindalemethodtoassessabrasionresistanceandappearancechanges.
ISO20344:Footweartestmethodsstandardcoveringmechanical(abrasion,punctureresistance)andchemical(waterproofing,slipresistance)properties.
BSEN388:Protectiveglovesmechanicalperformanceteststandard,includingabrasion,cutresistance(Coupe/TDM),tear,andpunctureresistanceratings.
BS-EN-13770:KnittedfootwearabrasionresistanceteststandardviatheMartindalemethodtoevaluatefabricwearperformance.
ISO12945:Textileabrasionresistancetest(possiblyrelatedtopilling),requiringconfirmationwiththestandardtextforspecifics.
GB/T4802.2:Textilepillingresistancetestusingthecircularlocusmethodtogradesurfacepillingonfabrics.
ASTMD4970:Textilecolorfastnesstorubbingtest,assessingdry/wetdyetransferwithgrayscaleratings.
M&SP17:Marks&Spencerstandardwashcolorfastnesstest,evaluatingcolorretentiononspecifiedadjacentfabricspost-laundering.
WoolmarkTM196:Wooltextileshrink-proofcertification,testingfeltingandappearancechangesaftermachinewashing/dryingtomeetWoolmarkrequirements.
Martindale abrasion tester working principle:
Test piece of fabric is placed in the specimen clamp, and it will be rubbed against with abradant in a Lissajous figure. According to the requirement, once the test piece is broken, test piece should be taken down to calculate its abrasion resistance index, or evaluate its rating of pilling through the visual description.
Features:
Multi-stroke quick change design The aerospace-grade aluminum material cover is a kind of removably designed for easy installation of specimens; Multiple standard speeds are available, which involving 47.5 rpm and 0.5X47.5 rpm, 1.25X47.5 rpm, and1.5x47.5rpm.
Intelligent operating touch screen
Color touch screen with icon control, easy to understand and use, bilingual switching between Chinese and English, single and multiple test options, with friction materials life reminder function, and two kinds of operatingmodes like built-in standard test program and custom test.
Stainless steel weight&imported aviation aluminum guide plate The working guide adopts a small degree of deformation of the aviation aluminum material; the weight and the test position are correspondingly numbered, which is convenient for recording the test result and analyzingthe test result; supportingthe installation of the weight and the sample fixing auxiliary fixture to reduce the deviation of the result caused by theoperation difference.
Multiple test loads available
The Martindale Wear and Puckering Tester is available with three loads, 3 kPa, 9 kPa and 12 kPa; it can also perform a puckering test; it is powerful, safe and reliable.
Highly automated
The instrument has a variety of built-in experimental modes that can be set to single or multiple modes. The instrument will beep when the test value reaches the preset value, and you can also set a countdown timer, which is both convenient and efficient.
Instrument Configurations and Consumables:
1.Specimen holder assembly of 9 sets;
2.9kPa, 12kPa additional loading weight , each of 9;
3.￠38mm, ￠140mm Abradent Fabric/Backing Felt cutter of 1 set;
4.￠38mm, ￠140mm test specimen cutting mat of 1 set;
5.Pilling Test Suite of 1 set;
6.SM-50 Photographs for pilling test of 1 set;
7.EMPA Photographic Standards for Pilling Test of 1 set, and SM-25 Standard Abradent Fabric of 1.6m×5m;
8.Standard Backing Foam. Width of 1.5m, Length of 0.5m. Pack of 4;
9.Standard Backing Felt Piece of 1;
10.￠90mm Standard Backing Felt Discs(Pack of 20);
11.￠38mm, ￠140mm spare blades of specimen cutter, 50 each;
12.Other necessary accessories recommended by manufacturer.
Specifications：
Drive system is PLC, programmable control with large touch-screen
①、Abrasion test
Max stroke of movement 5+/-0.5mm
Weight of holder and spindle 200+/-1g
②、Pilling test
Max stroke of movement 24+/-0.5mm
Weight of holder and spindle 155+/-1g
Technical Parameters:
|
Working stations:4 |
Pilling friction head: Clamping diameter 90mm, weight 155g |
|
Working mode: Fully automatic |
Sample filling hammer weight: 2385±10g |
|
Control panel: Full color touch screen control |
Large Lisa drawing: 60.5±0.5mm |
|
Language: Bilingual operation interface(CN/EN) |
Small Lisa drawing: 24±0.5mm |
|
Test speed: 47.5rpm and its times of 0.5. 1.25. and1.5(adjustable) |
Counting range: 0-999999 times |
|
Fuzzing and pilling fixture load block weight: 260g |
Weight: 70Kg |
|
Wear-resisting fixture pressure: 3kpa, 9kpa, and 12kpa |
Power supply: 220V 50HZ |
|
Wear-resisting friction head: Clamping diameter 28.8mm, weight 198g |
Diamensions:700mm*700mm*450mm |
在线联系供应商
Other supplier products
 |
UV-master Ultraviolet Aging Test Chamber | Get a quote： Whats/App: +86 181 0160 0864 The UV-master Ultraviolet Aging Test Chamber is a high-performance testing device specifically designed... |
 |
Filter Membrane Pore Analysis Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Filter Membrane Pore Analysis Tester is a precision instrument designed to mea... |
 |
Manual HEPA/ULPA Filter Scanning Test System | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Manual HEPA/ULPA Filter Scanning Test System is designed for quality control o... |
 |
Gas Oxidizing Properties Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Gas Oxidizing Properties Tester is a device used to assess the oxidizing chara... |
 |
Four-Ball Tribometer（Value Engineered Tribometer） | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Four-Ball Tribometer is a high-precision laboratory instrument designed to eva... |
Same products
 |
Laser Cutting Machines | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
