Cornell Mattress Fatigue Testing Machine
Get a quote：
Whats/App: +86 181 0160 0864
The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed for evaluating the long-term durability, compression resistance, and structural stability of full-size foam mattresses. The tester accommodates standard King and California King mattress sizes and applies controlled cyclic loading to simulate repetitive human use over an extended service life. The system supports both constant force and constant displacement loading modes and is suitable for laboratory-based durability evaluation and standard compliance testing.
Application
The King Size Foam Fatigue Tester is used for fatigue and durability evaluation of the following products:
Full foam mattresses (polyurethane foam, memory foam)
Latex mattresses
Hybrid mattresses (foam combined with spring or latex layers)
Mattress core foam blocks and assembled mattress systems
Large-size cushioning foam products
Mattress prototypes during product development
Production quality control and type testing of mattresses
Standards
The King Size Foam Fatigue Tester complies with or references the following standards:
ASTM D3574 – Dynamic Fatigue Test by Constant Force Pounding
ISO 2439 – Determination of indentation hardness and deflection
GB/T 26706 – General Technical Requirements for Mattresses (related clauses reference)
Parameters
| Parameter | Unit | Specification |
|---|---|---|
| Test Station | — | Single station |
| Applicable Mattress Size | — | King size, California King |
| Loading Method | — | Pneumatic |
| Loading Mode | — | Constant force / constant displacement |
| Maximum Test Frequency | cycles/min | ≤ 70 |
| Cylinder Stroke | in | 12 (customizable) |
| Indenter Diameter | mm | 250 |
| Load Measurement | — | Fatigue-rated load cell |
| Load Cell Capacity | lb | 500 |
| Positioning System | — | Manual X–Y gantry |
| Sample Retention | — | Four adjustable corner retainers |
| Control System | — | PLC with touchscreen interface |
| Air Supply Requirement | PSI | 80 |
| Power Supply | — | 120 VAC |
Features
Large test platform suitable for King and California King mattresses
Dual testing modes supporting constant force and constant displacement fatigue tests
Pneumatic loading system designed for high-cycle durability testing
Fatigue-rated load cell ensuring stable and repeatable dynamic load measurement
Manual X–Y gantry system allowing fatigue testing at any mattress location
Adjustable four-corner sample retainers for secure mattress positioning
High-frequency operation up to 70 cycles per minute to improve test efficiency
Touchscreen PLC control system for parameter setting, monitoring, and test control
Modular design supporting optional indenter sizes, stroke lengths, and load cell capacities
Accessories
Circular indenter, 250 mm diameter (ASTM D3574 compliant)
Pneumatic loading cylinder and air regulation components
Fatigue-rated load cell
Manual X–Y positioning gantry
Adjustable mattress corner retainers
PLC controller with touchscreen display
Compressed air connection components
Test Procedures
Place the mattress flat on the test platform
Adjust the four corner retainers to secure the mattress position
Select constant force or constant displacement test mode
Set test frequency, load or displacement value, and cycle count
Position the indenter using the X–Y gantry to the target test area
Start the fatigue test and allow the system to operate automatically
The system stops automatically upon reaching the preset cycle count
Remove the mattress after the indenter returns to the home position
在线联系供应商
Other supplier products
 |
Metal Corrosivity Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Metal Corrosivity Tester is used to determine the corrosivity of liquids and s... |
 |
Shoelace Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Shoelace Abrasion Tester is designed to evaluate the wear resistance of shoela... |
 |
High and low temperature universal creep testing machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The High and Low Temperature Universal Creep Testing Machine is designed for long-... |
 |
Velcro Fatigue Tester | Get a quote: Whats/App: +86 181 0160 0864 The Velcro fatigue strength tester is a device specifically designed to test the adhesive strength of V... |
 |
Office Chair Caster Durability Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Office Chair Caster Durability Tester is designed to evaluate the rolling dura... |
Same products
 |
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 | 卖方: 863048 | 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，... |
 |
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 | 卖方: 863048 | 迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | 卖方: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | 卖方: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
