Laboratory Automotive Wash and Friction Testing Bench
Get a quote：
Whats/App: +86 181 0160 0864
The Laboratory Automotive Wash and Friction Testing Bench is designed to evaluate the scratch resistance of automotive coating systems through controlled laboratory washing and friction tests. It simulates real-world car wash conditions in a repeatable and standardized laboratory environment, providing accurate assessment of coating durability under mechanical and frictional stress.
Application
Primary applications:
Assessing scratch resistance of automotive paint and clear coat systems
Evaluating coating performance under mechanical friction and water exposure
Laboratory testing for automotive coatings, material development, and quality control
Typical tested products:
Automotive exterior panels (metal and composite substrates)
Automotive clear coats and multi-layer paint systems
Laboratory-coated metal panels for R&D
Material samples requiring controlled wash and friction testing
Standards
(1) BS ISO 20566 – Paints and varnishes: Determination of coating system scratch resistance using laboratory car wash equipment
(2) ISO 20566:2021 – Paints and varnishes: Laboratory-scale car wash testing for coating systems
(3) ISO 13076 – Visual assessment of coating surface appearance
(4) ISO 2813 – Measurement of coating gloss
(5) ISO 13803 – Measurement of coating haze
(6) ISO 7724 – Color measurement and color difference evaluation of coatings
Parameters
Features
Full stainless steel test chamber with transparent doors for observation.
V-shaped bottom funnel for easy drainage and cleaning.
Removable brushes for quick replacement and reduced wear.
Inclined work platform minimizes brush abrasion during platform movement.
Customizable fixture holes on the platform for different sample sizes.
Two spray nozzles alternate with platform movement, ensuring uniform wash coverage.
Servo-driven work platform provides precise and repeatable test speeds.
Large capacity water tank with agitation ensures accurate mixing and consistent test results.
Water splash guards prevent damage to electrical components, enhancing safety.
Accessories
(1) Removable test brushes
(2) Spray nozzles (316 stainless steel)
(3) Sample platform fixtures
(4) Water mixing agitator
(5) Safety guards
Test Procedures
Installation of Wash Rotor
Attach the automotive wash brush rotor to the rotation shaft of the test bench using specialized bolts.
Gap Adjustment
Adjust the vertical gap between the rotor edge and test platform to 100 mm using adjustment tools.
Preparation of Test Solution
Add the cleaning agent to the circulating water tank and ensure thorough mixing using the built-in agitator.
Sample Placement
Place test parts or sample panels on the work platform.
Trial Run
Perform a preliminary run to ensure correct operation, brush contact, and spray distribution.
Formal Testing
Run the programmed wash cycle, applying controlled brush and water motion to evaluate coating scratch resistance.
Maintenance Information
Clean brushes and work platform after each test.
Inspect spray nozzles for clogging and clean or replace as needed.
Regularly check water tank level and agitator function.
Ensure platform drive system and safety switches are operational.
Keep test chamber dry and free from residue after tests to maintain accuracy.
在线联系供应商
Other supplier products
 |
Fabric horizontal burning tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The horizontal flammability tester is a device used to evaluate the combustion per... |
 |
Large Flame Flammability Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Flame Flammability Tester is developed according to the NFPA 701 Method 2 and ... |
 |
High-Temperature Reciprocating Friction and Wear Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The High-Temperature Reciprocating Friction and Wear Tester is designed for quanti... |
 |
AATCC Gray Scale for Color Change | Applicable Standards The AATCC Gray Scale aligns with international colorfastness evaluation protocols, including: AATCC Evaluation Procedure... |
 |
Air Permeability Tester STD-F8 | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Air Permeability Tester is a high-precision instrument designed to measure the... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
