Thermal/Acoustic Insulation Flame Spread Tester

Get a quote：

Whats/App: +86 181 0160 0864

Web: gellowen.co.uk

The Flame Spread Tester for Thermal and Acoustic Insulation Materials is designed to evaluate the flame propagation characteristics of insulation and acoustic materials. You can expose samples to a standard thermal radiation source and ignite them with a controlled flame to determine their critical heat flux. This instrument is FAA-approved and compliant with international standards, providing accurate and repeatable measurements for aerospace, civil aviation, and material development applications.

Application

You can apply this tester in the following scenarios:

Aerospace material testing: Evaluate flame propagation of thermal and acoustic insulation materials in aircraft interiors.

Civil aviation compliance: Test materials in accordance with FAA FAR Part 25 Appendix F Part VI.

Material development: Assess thermal and acoustic insulation performance during R&D.

Quality control: Monitor flame spread properties in production lines to ensure safety compliance.

Compatible test standards and protocols: FAR Part 25 Appendix F Part VI, Airbus AITM 2.0053. Boeing BSS 7365. MH/T 6042‑2006. and relevant national standards.

Standards

This tester conforms to the following national and international standards:

GB/T 27904‑2011 — Test method for flame spread of interior decoration materials

GB/T 25207‑2010 — Classification of combustion performance of building decorative materials

GB 8624‑2012 — Classification of burning behavior of building materials and products

GB/T 16172‑2007 — Determination of heat release rate and total heat release of building materials and products (Cone Calorimeter Method)

BSS 7365 — UK aerospace standard for combustion and smoke density of aerospace composite and interior materials

AITM 2.0053 — European aerospace industry method for heat release rate and smoke evaluation

FAR Part 25 Appendix F Part VI — FAA regulatory requirement for flame propagation, smoke density, and toxicity in civil aircraft cabin materials

Parameters

Parameter	Specification
Dimensions	1220 × 570 × 520 mm; 1200 × 1150 × 1350 mm; 800 × 800 × 400 mm
Weight	185 kg
Thermal Radiation Source	400 VAC, 3-phase electric heating plate, PID control, ±0.1°C accuracy
Radiation Strip Width	76 mm, six strips, operational up to 704°C
Sample Angle	30° relative to horizontal plane
Ignition System	Axially symmetric propane burner, 0.15 mm nozzle
Burner Height	Flame at least 51 mm above sample plane
Flame Spread Measurement	Laser pointer for accurate monitoring
Thermocouple Placement	Back wall 279 mm, right wall 292 mm, below radiation plate 51 mm, ±2°C accuracy
Heat Flux Range	≥60 kW/m², with self-circulating cooling water
Heat Flux Mounting	Steel plate 3.2 mm thick, with 3 × 25.4 mm insertion holes
Sample Holders	Standard and short versions (for hook-and-loop tests)
Data Acquisition	Computer and printer, automatic test timing ±0.1 s

Other supplier products

	Fully Automatic Falling Sand Abrasion Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Fully Automatic Falling Sand Abrasion Tester is designed to evaluate the wear ...
	Torque - to - Failure Tester for Metal Bone - connecting Screws	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Torque-to-Failure Tester for Metal Bone-Connecting Screws is a specialized device ...
	45-degree Dry Cleaning Tester	Get a quote: Whats/App: +86 181 0160 0864 The 45-degree Dry Cleaning Tester is composed of a bottom plate, a control panel and a drum. The clothe...
	Motorized Notching Machine / Notching Machines	Product Introduction: Plastic electric notch prototype is a cantilever beam, simply supported beam impact testing machine to do the impact toughne...
	Air Intake Filter Test System	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Air Intake Filter Test System is designed for testing industrial air filters a...

供应产品

Same products

	不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝	卖方: 863048	产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，...
	E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点	卖方: 863048	迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан...
	Mini Jewelry Laser Repair System – 60W to 400W Precision Welding	卖方: Beijing JCZ Technology Co., Ltd	The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre...
	Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal	卖方: Beijing JCZ Technology Co., Ltd	TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig...
	Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner	卖方: Beijing JCZ Technology Co., Ltd	The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las...