ECE R16 Seatbelt Test Dummy Manufacturer
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The ECE R16 crash test dummy is a professional anthropomorphic test device representing a 50th percentile adult male. You can use it for dynamic seatbelt testing, vehicle restraint system evaluation, and occupant injury analysis. Its design accurately reflects human mass distribution and body dimensions, making it compatible with test sleds, vehicle seats, and other restraint system loading devices. The dummy complies with GB 14166-2013 and ECE R16. enabling regulatory and certification testing.
Standards
You can conduct tests using this dummy in accordance with the following standards:
(1) GB 14166-2013 — Motor Vehicle Occupant Restraint System Crash Test Dummy;
(2) ECE R16 — Uniform Provisions Concerning the Approval of Vehicles with Regard to Safety Belts;
(3) ISO 15830 — Road Vehicles — Side Impact Dummies for Restraint System Assessment;
(4) Additional applicable regional or NCAP requirements for safety belt testing.
Parameters
Body Dimensions
| No. | Parameter | Dimension (mm) |
|---|---|---|
| 1 | Head Width | 160 ± 5 |
| 2 | Shoulder Width | 465 ± 5 |
| 3 | Trunk Width at Hip | 120 ± 5 |
| 4 | Hip Width | 340 ± 5 |
| 5 | Knee Center to Foot Height | 510 ± 10 |
| 6 | Hip Center to Foot Height | 990 ± 10 |
| 7 | Upper Trunk Plane to Foot Height | 1470 ± 10 |
| 8 | Head Bolt Center to Foot Height | 1600 ± 10 |
| 9 | Head Top to Foot Height | 1750 ± 10 |
| 10 | T-Point Height | 720 ± 5 |
| 11 | P-Point Height | 320 ± 5 |
Mass Distribution
| No. | Component | Mass (kg) |
|---|---|---|
| 1 | Head Assembly | 4.0 ± 0.2 |
| 2 | Neck Assembly | 0.7 ± 0.1 |
| 3 | Torso Assembly | 29.7 ± 1.0 |
| 4 | Thigh Assembly (L/R) | 12.3 ± 0.3 |
| 5 | Lower Leg Assembly | 8.4 ± 0.3 |
| 6 | Hip Joint | 3.1 ± 0.1 |
| 7 | Knee Assembly | 1.1 ± 0.1 |
| 8 | Outer Cover + Chest Pad | 1.1 ± 0.1 |
| 9 | Total Weight (with calibration mass) | 75.5 ± 1.0 |
Sensor Configuration
| Location | Sensor Type | Channel |
|---|---|---|
| Chest | Wire Pull Displacement Sensor | 1 |
| Pelvis | Wire Pull Displacement Sensor | 2 |
Features
(1) Accurately represents a 50th percentile adult male in terms of mass distribution and dimensions.
(2) Modular construction allows you to replace thighs, lower legs, and torso components.
(3) Eliminates forearms while retaining single lower legs for dedicated seatbelt testing.
(4) Soft chest pad enhances realistic seatbelt load simulation.
(5) Fully compliant with GB 14166-2013 and ECE R16. supporting certification tests.
(6) Metal skeleton with polyurethane covering ensures strength, durability, and realistic biomechanical response.
Accessories
(1) Replacement thigh and lower leg modules;
(2) Chest pad and outer cover;
(3) Calibration weights;
(4) Mounting adapters for sled or seat testing;
(5) Wiring and connectors for displacement sensors.
在线联系供应商
Other supplier products
 |
Mattress Rollator Manufacturer | Mattress Rolling Fatigue Testing Machine (ISO 2439 / EN 1957) | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features 240 lb hexagonal hardwood roller mounted on precision ball bearings... |
 |
Horizontal Vertical Flame Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction UL94 Horizontal Vertical Flame Testeris designed to simulate the early firing... |
 |
Laser compression testing equipment supplier | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 7759-2008: Determination of compression set of rubber and rubber produc... |
 |
Automotive Textile UV Resistance Analyzer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile UV Protection Performance Tester is used to evaluate the ability of t... |
 |
SunTest color fastness tester manufacturer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Qinsun si220 is a highly economic material color lightfastness tester that can... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
