ISO Standard Vacuum Tribology Testing Machine for Space Simulation Research
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Vacuum Friction and Wear Tester integrates a proven friction and wear testing mechanism into a sealed vacuum chamber, enabling reliable tribological testing under controlled vacuum conditions. By reproducing low-pressure environments that are difficult to simulate with conventional equipment, this system makes friction and wear evaluation under vacuum straightforward and repeatable. It is especially suited for performance assessment of materials, coatings, and components used in aerospace, advanced materials research, and emerging technologies where ambient-pressure testing is insufficient.
Standards
The Vacuum Friction and Wear Tester supports or is applicable to the following international and industry standards:
NASA / SAE AMS 3150 (Vacuum friction and wear testing of aerospace materials)
ESA PSS-01-705 (Friction and wear testing for space application materials under vacuum)
GB/T 6040-2008 (Metallic surface wear resistance test method)
GB/T 10375-2008 (Tribological test methods – reciprocating friction and wear testing)
ISO 12137-2 (Abrasion resistance of coated fabrics and films – environmental testing)
ISO 20502 (Fine ceramics and coatings scratch / wear testing, adaptable to vacuum conditions)
JIS L 0849 (Abrasion resistance test method for plastic products, optional vacuum conditions)
JIS P 8139 (Friction and wear performance evaluation of coatings, applicable in vacuum chambers)
Parameters
| Parameter Category | Specification |
|---|---|
| Vertical Load | 10–1000 g |
| Loading Method | Weight loading, switchable configuration |
| Specimen Fixing Method | Central bolt fixing (adjustable to specimen shape); vacuum chuck (optional) |
| Force Sensor | Capacity: 9.8 N; Measurement accuracy: ±0.098 N |
| Upper Specimen Holder | Dedicated clamping fixture |
| Lower Specimen Fixing | Bolted to rotating worktable |
| Rotating Table Size | φ60 mm |
| Rotational Speed Range | 1–2000 rpm |
| Vacuum Pump System | Turbomolecular pump combined with rotary pump |
| Dynamic Strain Amplifier | Integrated within control rack |
| Friction Force / External Output | External output terminal on control rack |
| Data Analysis System | General-purpose friction analysis software |
Features
Vacuum-integrated tribological testing structure
A well-established friction and wear testing mechanism is housed within a vacuum chamber, enabling accurate testing under low-pressure conditions.
Stable and reliable loading system
The balanced weight loading method allows precise load application starting from low loads, ensuring consistent contact conditions during testing.
Flexible test configuration
The rotating worktable supports a wide range of test modes, including optional high-speed wear testing and customized low-load configurations.
Wide vacuum capability
The standard configuration achieves vacuum levels down to 10 Pa, with optional high-vacuum specifications available to meet specialized testing requirements.
Integrated data acquisition and analysis
Friction force signals are captured via a dedicated sensor and processed using professional tribological analysis software for reliable result interpretation.
Accessories
Specimen holding clamps (customized upon request)
Tribological analysis software with A/D converter
Power cable
Operation manual
在线联系供应商
Other supplier products
 |
Smoke Density Test Apparatus/ En 50268/ IEC 61034 | Whats/App: +86 156 1874 6768 Web: standard-groups.com None halogen cables and materials are required to measure smoke density; the main principle... |
 |
Automatic Kinematic Viscosity Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards You can operate this tester in compliance with the following standards: (1) GB/... |
 |
Intramedullary Nails Four - point Bending Fatigue Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intr... |
 |
High frequency reciprocating tribometer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Friction and wear testing of metallic and non-metallic materials. Evaluation ... |
 |
Guidewire Pushing Force Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Guidewire Pushing Force Tester is a testing device used to verify and record the perfor... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
