Rotary Tribometer

Get a quote：

Whats/App: +86 181 0160 0864

Web: gellowen.co.uk

The Rotary Tribometer is a multifunctional friction and wear testing instrument designed for comprehensive tribological research. You use this system to study friction behavior, wear mechanisms, and lubrication performance under controlled rotational motion. By combining axial loading, precise load control, and an open test platform, the Rotary Tribometer allows you to simulate a wide range of real operating conditions, including dry friction, lubricated friction, high-speed rotation, and high-temperature environments. It provides accurate measurement of friction coefficient, wear behavior, temperature, vibration, and electrical contact resistance for material and lubricant evaluation.

Application

You can apply the Rotary Tribometer in laboratory research, quality evaluation, and component performance testing across multiple industries, including:

Lubricant anti-wear, extreme-pressure, and friction performance evaluation

(four-ball tests, thrust washer tests)

Material friction and wear research

(pin-on-disk, thrust pad, bearing materials, rolling contact fatigue)

Performance evaluation of hydraulic and lubrication system components

(pump vanes, slipper pads, seals)

Friction, wear, and lifetime analysis of bearings, gears, and rotating components

High-temperature dry friction and lubricated friction testing

(with test temperatures up to 600 °C using high-temperature fixtures)

Tribocorrosion and electrochemical wear studies

(lip seals and three-electrode systems)

Small-sample friction testing

(LVFA, Suzuki-type tests, miniature thrust pads)

Rolling contact fatigue and tilting bearing performance evaluation

Standards

You can conduct tests in accordance with widely recognized international and regional standards, including:

(1) GB/T 3140 series – Wear performance testing of lubricating oils and greases

(2) ASTM D2266 – Anti-wear properties of lubricating grease (four-ball method)

(3) ASTM D2783 – Extreme pressure properties of lubricating fluids

(4) ASTM D3702 – Thrust washer wear testing

(5) ASTM D4172 – Anti-wear properties of lubricating oils

(6) ASTM D5183 – Determination of friction coefficient of lubricants

(7) ASTM G99 – Pin-on-disk wear testing

(8) DIN 50324 – Determination of friction and wear of solid materials

(9) DIN 51350 (Parts 1–6) – Lubricant shear stability and wear testing

(10) ISO 11008 – Extreme pressure properties of lubricating greases (four-ball method)

(11) IP 239 / IP 300 – Lubricant extreme pressure and wear tests

(12) CEC L-45-T-93 – Shear stability of transmission fluids

Parameters

Item	Standard Configuration	High-Speed Configuration	Upgraded Configuration
Speed Range	30–3,000 rpm	30–3,000 rpm / 100–10,000 rpm	Same as high-speed
Maximum Spindle Load	10,000 N @ 3,000 rpm	10,000 N @ 3,000 rpm / 4,000 N @ 10,000 rpm	Same as high-speed
Maximum Spindle Speed	6,000 rpm	10,000 rpm	10,000 rpm
Torque Capacity	14 Nm @ 30–1,500 rpm	14 Nm @ 30–1,500 rpm / 7 Nm @ 3,000 rpm / 2.1 Nm @ 10,000 rpm	25 Nm @ 30–1,500 rpm / 13 Nm @ 3,000 rpm / 4 Nm @ 10,000 rpm
Motor Power	2.2 kW, single-phase	2.2 kW, single-phase	4 kW, three-phase
Temperature Capability	Up to 600 °C (with high-temperature fixture)	Up to 600 °C (with high-temperature fixture)	Up to 600 °C (with high-temperature fixture)
Load Range	1–10,000 N (depending on actuator)	1–10,000 N (depending on actuator)	1–10,000 N (depending on actuator)
Control Parameters	Speed, load, temperature, test time	Speed, load, temperature, test time	Speed, load, temperature, test time
Recorded Parameters	Speed, friction torque, friction coefficient, contact resistance, temperature, sliding distance, cycle count	Same as standard	Same as standard
Data Interface	USB / software	USB / software	USB / software
Air Supply	≥ 4 cfm @ 8 bar	≥ 4 cfm @ 8 bar	≥ 4 cfm @ 8 bar
Dimensions	900 × 600 × 2,000 mm	900 × 600 × 2,000 mm	900 × 600 × 2,000 mm
Weight	350 kg	350 kg	350 kg

Other supplier products

	Computer controlled horizontal tensile testing machine	Product Introduction: The microcomputer controlled horizontal tensile testing machine (hereinafter referred to as the testing machine) is mainly u...
	Block-on-Ring Test Machine	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Block-on-Ring Test Machine is a tribological testing system designed to evalua...
	Falling ball rebound instrument / Ball Rebound Tester	Product Introduction: The falling ball rebound instrument is designed and manufactured according to GB/T6670-2008 or ISO8307 or ASMD3574. It is su...
	Bag lifting fatigue testing machine / Bag Fatigue Testing Machine	Product Introduction: This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage vest bag, kraft paper bag, woven...
	Car seat static strength tester	Get a quote： Whats/App: +86 181 0160 0864 The Car Seat Static Strength Tester is a dedicated testing system used to evaluate the static load-bear...

供应产品

Same products

	Choosing the Right Equipment for Heavy-Duty Cleaning	卖方: Taizhou Feike Mechanical Technology Co., Ltd.	FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve...
	ER4043 Silicon Aluminum Welding Wire	卖方: 868776	Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin...
	HDPE高速水冷双壁波纹管生产线	卖方: Shandong HUASU Plastic Technology Co.,Ltd.	机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功...
	PanEVAP & MVR system	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...