Dry Friction and Wear Tribometer (Value Engineered Tribometer)
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Dry Friction and Wear Tribometer is a value-engineered, multi-functional testing instrument designed to study the friction and wear behavior of materials under dry or self-lubricated conditions. You can precisely control load, speed, and temperature through pneumatic loading, while an air-bearing friction assembly and touch-screen PC interface provide accurate measurement and data logging. The instrument supports online or offline wear measurement and is suitable for both research and industrial laboratory evaluation of material tribological performance.
Application
You can use this tribometer for:
(1) Evaluating dry friction and wear performance of metals, alloys, ceramics, and composite materials.
(2) Measuring wear rate of self-lubricating materials under sliding conditions.
(3) Assessing friction and wear performance of surface-engineered materials, including coatings, films, and heat-treated layers.
(4) Studying friction coefficients and wear behavior of engineering plastics and polymer materials.
(5) Pin-on-disc friction and wear testing.
(6) Thrust washer self-lubricating wear testing.
(7) Screening material tribological properties during development.
(8) Industrial product quality control and failure analysis.
Standards
You can perform tests in accordance with the following international standards:
(1) ASTM D3702 – Standard Test Method for Wear Rate of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
(2) ASTM G99 – Standard Test Method for Wear Testing with a Pin-on-Disc Apparatus
Note: The instrument structure and control logic are consistent with internationally recognized pin-on-disc and thrust washer test devices, ensuring compliance with relevant research and benchmark testing requirements.
Parameters
| Parameter | Specification |
|---|---|
| Thrust Washer Test | Compliant with ASTM D3702 |
| Pin-on-Disc Test | Compliant with ASTM G99 |
| Pin Track Radius | 10–35 mm |
| Pin Dimensions | Ø8 mm × 15 mm |
| Test Disc Diameter | Maximum 75 mm |
| Load Range | 20–750 N (@6 bar air pressure) |
| Load Application | Pneumatic |
| Load Measurement | Pressure sensor |
| Load Control | Manual precision regulator |
| Friction Measurement | Databeam strain gauge sensor |
| Torque Reaction Support | Air bearing |
| Temperature Range | Ambient to 200°C |
| Heating Power | 550 W |
| Temperature Sensor | K-type thermocouple |
| Speed Range | 30–1,800 rpm |
| Motor | 1.5 kW AC vector motor |
| Control & Data Acquisition | Touch-screen PC interface |
| Data Export | USB |
在线联系供应商
Other supplier products
 |
Spinal Internal Fixation System Component Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Spinal Internal Fixation System Component Testing Machine is a specialized mec... |
 |
Railway Locomotive Cable Dynamic Cut-through Tester | Get a quote： Whats/App: +86 181 0160 0864 The Railway Locomotive Cable Dynamic Cut-through Tester is designed to evaluate the insulation strength... |
 |
Safety Helmet Anti-static Tester / Testing Equipment | Product Introduction: Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB... |
 |
Scratch Hardness Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Scratch Hardness Tester is designed to quantitatively evaluate the scratch res... |
 |
Femoral Condyles Components Fatigue Performance Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Femoral Condyles Components Fatigue Performance Tester is a specialized mechan... |
Same products
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: 868255 | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
