Safety Helmet Flammability Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Safety Helmet Flammability Tester is designed to evaluate the flame-retardant performance of safety helmets when exposed to a standardized open flame. The instrument provides a controlled and repeatable test environment to determine afterflame time and afterglow time, ensuring that helmets meet fire safety requirements under relevant national and international standards. With a high degree of automation and precise timing control, it is widely used by helmet manufacturers, quality inspection institutions, and construction engineering testing laboratories.
Application
The tester is suitable for flame retardancy assessment of head protection products exposed to fire or high-temperature environments. Typical application scenarios and tested products include:
(1) Industrial Safety Helmets – construction helmets, mining helmets, oil and gas industry helmets.
(2) Electrical Safety Helmets – insulating helmets used for power distribution, substations, and electrical maintenance.
(3) Rescue and Emergency Helmets – firefighting helmets, emergency rescue helmets, disaster response helmets.
(4) Special Protective Helmets – metallurgical helmets, chemical industry helmets, welding and thermal operation helmets.
(5) Helmet Materials and Components – helmet shells, brim materials, suspension systems, and flame-retardant coatings.
(6) Quality Control and Certification Testing – routine factory inspection, third-party certification, and type testing for compliance verification.
Standards
The Safety Helmet Flammability Tester complies with and supports testing according to the following standards:
(1) GB/T 2811-2007 – Safety helmets (China)
(2) GB/T 2812-2006 – Safety helmet test methods (China)
(3) GB/T 38305-2019 – Head protection – Rescue helmets (China)
(4) EN 397 – Industrial safety helmets (Europe)
(5) EN 443 – Helmets for fire fighting in buildings and other structures (Europe)
(6) ANSI/ISEA Z89.1 – Industrial head protection (USA)
(7) CSA Z94.1 – Industrial protective headwear (Canada)
(8) ISO 11612 – Protective clothing against heat and flame (related material reference)
(9) ISO 17025 – General requirements for the competence of testing laboratories
(10) CE Conformity – Machinery and safety compliance
(11) ISO 9001 – Quality management systems
Features
(1) High-automation test process ensuring consistent and repeatable flame exposure.
(2) Precise measurement of afterflame time and afterglow time.
(3) Standard Bunsen burner flame source with controlled flame dimensions.
(4) Adjustable flame application time suitable for different standards.
(5) Compatible with multiple standard test gases including methane, propane, butane, and LPG.
(6) Stable fixture system for accurate positioning of helmets or test specimens.
(7) Clear timing display with high resolution for objective result evaluation.
(8) Reliable safety design suitable for routine laboratory and factory testing.
Technical Parameters
| Parameter | Specification |
|---|---|
| Bunsen Burner Inner Diameter | 10 mm |
| Ignition Timing Range | 0 – 999.9 s (typical standard setting: 10 s) |
| Afterflame / Afterglow Timer Range | 0 – 999.9 s |
| Timer Accuracy | ±0.01 s |
| Flame Length Measuring Scale | 50 mm |
| Applicable Gas Types | Methane, Propane, Butane, LPG |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 50 W |
在线联系供应商
Other supplier products
 |
Taber 5900 Reciprocating Abraser | Get a quote： Whats/App: +86 181 0160 0864 Fixed sample on a horizontal table, wearing it under the specified abrasive and load with the horizonta... |
 |
Electrochemical Reciprocating Friction and Wear Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Electrochemical Reciprocating Friction and Wear Tester is a specialized instru... |
 |
Scott Flex Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Scott Flex Tester is designed to evaluate the flexing and kneading resistance ... |
 |
SDC Fading Grey Scale | Applicable Standards The SDC Grey Scale adheres to international colorfastness testing protocols, including: ISO 105-A02(Grey Scale for Asses... |
 |
Textile Drying Time Tester | Getaquote: Whats/App: +86 181 0160 0864 The Textile Drying Time Tester is a precision instrument designed to measure evaporation rate and drying ... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
