Bone Plate Four-Point Bending Fatigue Testing Machine | ISO 9585 ASTM F382
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
(1)YY/T 1503
(2)ASTM F382
These standards specify the testing methods for the bending fatigue performance of metallic bone plates. They provide evaluation methods for different designs of bone plates. Fatigue tests are conducted under cyclic loading at a frequency of 5 Hz, with R = 0.1. for 1 million cycles or until specimen failure.
The M series electromagnetic testing system provides precise sinusoidal load control and offers comprehensive test fixtures (different sizes, contoured rollers, etc.) to accommodate specimens of various dimensions. The system also provides accurate and effective testing procedures (SOPs) to support mechanical performance analysis of metal bone plates or comparison of different bone plate designs.
Application
The Bone Plate Four-Point Bending Fatigue Testing Machine is designed to evaluate the mechanical durability and structural performance of orthopedic bone plates under repeated bending loads. Typical applications include:
Orthopedic implant testing: Assess bending strength, stiffness, and fatigue life of bone plates.
Quality control: Ensure consistent mechanical performance of bone plates during production.
Research and development: Optimize design, material, and geometry of bone plates for enhanced fatigue resistance.
Standards compliance: Perform tests according to ISO 9585. ASTM F382. and other relevant international guidelines.
This machine helps verify that bone plates can withstand cyclic bending stresses encountered in clinical use.
Product Features
Next-generation fatigue testing system driven by a large electromagnetic motor.
Direct-drive electromagnetic motor ensures stable operation, high repeatability, and precise control of force and displacement.
Built-in electromagnetic actuator with low friction and high repeatability; high system responsiveness and speed.
Capable of performing tensile, compressive, bending, shear, creep, and relaxation tests.
Meets modern material testing requirements for high precision, high frequency, stability, durability, and reliability.
Oil-free, seal-free, maintenance-free, long life, highly integrated, easy installation, and compact footprint.
Wide selection of clamps and accessories available.
Specifications
| Parameter | Value |
|---|---|
| Maximum Load Peak | 1100 N |
| Dynamic Load Peak | 1000 N |
| Static Load Peak | 700 N |
| Testing Machine Grade | 0.5 |
| Load Measurement Range | 0.4% – 100% F.S. |
| Load Measurement Accuracy | ±0.2% of indicated value (within measurement range) |
| Maximum Fatigue Loading Frequency | 100 Hz |
| Axial Stroke | 30 mm |
| Displacement Resolution | 0.1 μm |
| Test Space (Upper-Lower Fixture Gap) | 0–950 mm |
| Net Weight | Approx. 900 kg |
| Dimensions | Approx. 1000 × 700 × 1800 mm |
| Optional Environmental Accessories | Water bath, high temperature, low temperature, humidity environment, etc. |
| Applications | Fatigue/fracture/static testing of metals, polymers, composites; static/dynamic testing of surgical implants (trauma, joint, spine, dental), polymer tensile fatigue testing, rubber crack propagation testing, etc. |
| Optional Fixtures | Mechanical tensile clamps, compression clamps, bending clamps, femoral stem fixtures, four-point bending fixtures, spinal rod/screw fixtures, tibial plateau fixtures, vertebral resection model compression/tensile fixtures, dental implant fixtures, etc. |
Accessories
(1)Specimen Fixtures: Adjustable supports for securing bone plates in a four-point bending setup.
(2)Load Frame and Actuator: Delivers controlled cyclic bending loads to the test sample.
(3)Data Acquisition System: Records forces, displacement, and fatigue cycles.
(4)Calibration Tools: Ensure accuracy of sensors and force measurement.
在线联系供应商
Other supplier products
 |
ISO 29463 Filter Scanning Test System | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automated HEPA/ULPA Filter Scanning Test System is designed for automated... |
 |
Rotary Reciprocating Friction and Wear Tester | ASTM G133 Tribometer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Reciprocating-Rotary Friction and Wear Tester (Type 1) is designed for ev... |
 |
Respirator Fit Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Qinsun PortaCount Respirator Fit Tester assesses the overall integrity of masks by perf... |
 |
Fabric Far Infrared Energy Conversion Efficiency Analyzer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Quality control and performance evaluation of natural fibers such as cotton an... |
 |
Vacuum Cleaner Floor Brush Impact Comprehensive Performance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheVacuum Cleaner Comprehensive Performance Testing Systemis an integrated multifunctional ... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
