Nonwovens Liquid Loss Tester | ISO 9073-6 Nonwoven Fabric Absorption Testing Machine
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Test Principle
A standard absorbent medium is placed beneath the nonwoven sample, positioned on a sloping pad. A specified amount of test liquid is applied to the sample. The liquid penetrates the nonwoven and is absorbed by the medium. By measuring the mass of the absorbent medium before and after testing, the liquid loss performance of the nonwoven sample is calculated.
Technical Parameters
| Parameter | Specification |
|---|---|
| Flow Control Range | 6.10–6.41 mL/s |
| Slope Angle | 25° |
| Slip and Loss Length | 250 ± 0.2 mm |
| Timing | 60 s, ±0.1 s accuracy |
| Slip and Loss Weight | 30 g ± 0.01 g |
| Liquid Volume | 25 mL/test |
| Measurement Method | Gravimetric via absorbent medium |
Accessories
Standard sample fixture
Built-in dosing system
Optional weighing system
Digital display and timing module
Test Procedures / Maintenance
(1) Place the standard absorbent medium under the nonwoven sample.
(2) Mount the sample on the slope pad and secure with the fixture.
(3) Fill the dosing device with test liquid (e.g., artificial urine).
(4) Start the test: liquid is dispensed manually or automatically over 4 ± 0.1 s.
(5) Measure the mass of the absorbent medium before and after the test to calculate liquid loss.
(6) Clean the dosing system and sample fixture after each test to prevent residue buildup.
(7) Perform regular calibration checks for dosing volume and timing accuracy.
在线联系供应商
Other supplier products
 |
Wet leakage current test system of photovoltaic module | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Wet Leakage Current Test System is designed for high-precision evaluation of insulation... |
 |
Appliance Stability meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction The device conforms to GB4706-1 Article 20.1. IEC60335-1 Article 20.1... |
 |
Fabric bending rigidity tester for quality assurance | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Pure Bending Tester analyzes hand movements-referred to as "bending"-performed by artis... |
 |
50th Percentile FAA Crash Test Dummy | Whats/App: +86 156 1874 6768 Web: standard-groups.com The 50th Percentile FAA Crash Test Dummy is a professional, anthropomorphic test device des... |
 |
Rail transit car wire abrasion testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Rail Transit Car Wire Abrasion Testing Machine is designed to evaluate the abrasion res... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
