ISO 20653 Automotive Wire Harness Dust & Sand Test Equipment Supplier Factory Direct

Get a quote：

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Technical Parameters:

Model No.		STD-A	STD-B	STD-C
Inner chamber size W×H×D(cm)		80×80×80	100×100×100	100×100×150
Exterior chamber size W×H×D(cm)		130×170×120	150×190×140	150×190×190
Time setting range		0～999h adjustable
Temperature setting range		RT+10~50℃
Test dust		Talcum powder
Dust usage		2～4kg/m³
Vacuum degree		0～10.0KPa, adjustable
Dust reduction method		Free dust falling
Controller		The programmable touch screen controller
Vacuum system		Equipped with pressure gauge, air filtration, pressure regulation, connecting pipe, vacuum pump
Circulation fan		Low noise, multi-blade centrifugal fan
Protective device		Leakage protection, short circuit protection
Dust heating system		Stainless steel heating tube
Material	Outer chamber material	Cold-rolled sheet with powder coating
	Inner chamber material	SUS#304 stainless steel plate
Other components		Wiper, caster adjuster
Power supply		AC 1Ψ 220V; 3Ψ 380V 60/50Hz
Customization service		Non-standard or special requirements can be customized.

The Theory of Dustproof Testing Machine：

The chamber is designed to create an environment with a controlled concentration of dust particles, which can be adjusted to simulate different levels of dust exposure. The test samples are placed inside the chamber and subjected to the dust for a specified period of time while the environmental conditions such as temperature and humidity are closely monitored and controlled.

The Application of Dust Free Chamber：

The purpose of the Dust test chambers is to evaluate the ability of the product to withstand exposure to dust and the effects of such exposure on the performance, functionality, and longevity of the product. The testing is particularly important for products used in industries such as automotive, aerospace, electronics, and construction, where exposure to dust and sand can cause serious damage. So dust test chambers can be used to evaluate all mechanical, optical, electrical, electronic, electromechanical and electrochemical devices that may be exposed to dry sandblasting, dusting atmospheres, or dusting conditions.

A dust-proof test chamber, also known as a dust chamber, is used to simulate dusty environments to test the ability of various products to resist the effects of dust and debris. The chamber creates a controlled environment in which different types of dust and debris can be introduced, allowing manufacturers to test the durability and reliability of their products under specific conditions.

Some specific applications of dust-proof test chambers include:

Electronics Testing: Dust-proof test chambers are used to test the ability of electronic components such as printed circuit boards (PCBs) and electronic devices to withstand exposure to dust and debris. This helps manufacturers to develop more robust products that are less likely to fail due to dust and debris.

Automotive Testing: Dust-proof test chambers are used to test the durability of automotive components such as air filters, engine components, and electronic systems. This is particularly important in off-road vehicles and construction equipment where exposure to dust and debris is common.

Aerospace Testing: Dust-proof test chambers are used to test the ability of aerospace components such as avionics and sensors to withstand the effects of dust and debris. This is critical in aircraft and spacecraft where the failure of a single component can have catastrophic consequences.

Consumer Goods Testing: Dust-proof test chambers are used to test the durability of consumer goods such as smarts, laptops, and outdoor equipment. This helps manufacturers to develop products that can withstand exposure to dust and debris in real-world scenarios.

Structural Features:

1. Material of the chamber outer shell: High - quality carbon steel plate, with phosphating and electrostatic powder spraying on the surface, and hairline treatment for SUS304 stainless - steel strips;

2. Inner liner material: Imported SUS stainless - steel polished plate;

3. Chamber door: Tempered glass door, facilitating the observation of the tested samples inside the test chamber;

4. High - quality fixed PU casters are used at the bottom;

5. There is a dust - replacement device at the bottom of the test chamber;

Other supplier products

	High Precision Socks Wear Testing Equipment ISO Standard	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The machine complies with international and national standards, in...
	Powder Wet Vibrating Screen System For Lithium Battery Material Testing	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM E11: Standard Specification for Woven Wire Test Sieve Cloth and Test Sieve...
	High-Speed Reciprocating Friction and Wear Tester (Model 2M) OEM Supplier	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The High-Speed Reciprocating Friction and Wear Tester (Model 2M) is designed ...
	Perspiration Tester 丨Perspiration Test machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Compliant Standards ISO 105 E01: Textiles - Tests for colour fastness - Part E01: Colour f...
	Abrasive Wear Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM G65 - 04 GB/T 3960-1983 Main Purposes The wet - type rubber wheel abrasiv...

供应产品

Same products

	ER4047 Aluminum Mig Welding Wire	卖方: 868776	Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material...
	ER4043 Silicon Aluminum Welding Wire	卖方: 868776	Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate...
	Choosing the Right Equipment for Heavy-Duty Cleaning	卖方: Taizhou Feike Mechanical Technology Co., Ltd.	FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve...
	ER4043 Silicon Aluminum Welding Wire	卖方: 868776	Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin...
	HDPE高速水冷双壁波纹管生产线	卖方: Shandong HUASU Plastic Technology Co.,Ltd.	机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功...