ISO 5659 ASTM E662 Smoke Density Test Equipment Supplier Factory Direct
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Parameters
| Parameter | Specification |
|---|---|
| Measurement range | 0.0001–100% smoke density; 0–924 (six automatic ranges) |
| Operating voltage | 200–240 V, 50 Hz |
| Environmental conditions | Room temperature – 40°C, relative humidity ≤85% |
| Heat flux | 50 kW/m² |
| Light source | 6.5 V incandescent lamp, wavelength 400–750 nm |
| Detector | Silicon photodiode, 0–100% transmittance, 0.001% precision |
| Fuel type | Propane ≥95% purity |
| Burner | Igniter and nozzle combination, 10 mm from sample |
| Smoke measurement system | Digital display of optical density |
| Chamber design | Fully open doors for easy loading, cleaning, and side-mounted controller |
| Gas sampling port | Optional, for toxicity testing |
| Chamber coating | Chemically resistant and easy to clean |
Features
(1) High-precision smoke measurement: Advanced photodetector and silicon cell ensure accurate optical density readings.
(2) Automated testing: Minimizes manual intervention, improving efficiency and data reliability.
(3) Standards compatibility: Supports GB, ISO, ASTM, and other international standards.
(4) Versatile applications: Suitable for plastics, construction, automotive, aerospace, and safety testing.
(5) Safety design: Equipped with automatic shut-off to ensure operational safety.
(6) Modular configuration: Optional gas measurement ports and printer for expanded functionality.
(7) Durable and stable: High-quality materials and corrosion-resistant coating ensure long-term reliability.
Accessories
(1) Propane cylinder (≥95% purity, user-supplied)
(2) Smoke sampling tube (1 set)
(3) Silicon photodiode (1)
(4) Light source lamp, 6.5 V (1)
(5) Filter set (1)
(6) Protective door (1)
Test Principles
The F313 Plastic Smoke Density Tester measures smoke optical density by placing a burning plastic sample in a controlled environment. A light source passes through the smoke, and a silicon photodiode detects the transmitted light. The system calculates the specific optical density of the smoke. Maximum optical density is measured to evaluate the smoke-generating characteristics of the plastic material. All measurements strictly comply with GB, ISO, and ASTM standards.
Operation Instructions
Sample preparation: Ensure test samples meet dimensional requirements (100 × 100 mm, thickness ≤50 mm).
Device setup: Connect power and set appropriate parameters, including temperature and gas flow.
Start test: Press the “Start Test” button; the system automatically ignites the sample and collects data.
Safety precautions: Operators should wear protective equipment and ensure adequate ventilation.
Test completion: Data is automatically displayed and can be printed. Clean the chamber to remove residual smoke before turning off the device.
在线联系供应商
Other supplier products
 |
Whole shoe breathability and heat preservation testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard SATRA TM376: Thermal insulation testing of footwear with sock integration. SAT... |
 |
Large Corrosion Salt-Spray Walk-In Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications 1. Automotive Industry Testing the corrosion resistance of complete vehicles... |
 |
Stick Slip Test Stand for Material Combinations(G-SSP)，Stick-slip behavior testing equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Stick-Slip Tribological Test Stand is a laboratory testing system used to evaluate fric... |
 |
Flammability test furnace for building materials,Flammability testing chamber for building materials | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Touch screen control building materials flammability test furnace ad... |
 |
Abrasion and scratch failure simulation tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Scratch resistance testing of plastic and polymer materials Surface performan... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
