DN25-300 mm ，Stationary Valve Core Grinding Machine Stationary Valve Grinding Machine
Feature:1、Stationary, more stable and durable2、double station design,Easy to operate, higher efficiency
1)diameter of Grinding disc: Dia500mm
2)Scope of Grinding:Dia25-Dia300mm
3)Quantity of grinding disc:2 pcs
4)Application : valve core of plane globe valve, gate valve .
5) Motor Power:1100W,Double motor.
6)Speed regulation mode:Variable frequency stepless speed regulation
7)Power supply: 220 V/50Hz
8) motor power: 1100W x2=2.2kw double motor
Stationaryvalve grinding machineis suitable for the valve disks of gate valves and globe valves,it is widely applied in coal-fired power petrochemical steel metallurgical paper and other industriesFeature:1、Stationary, more stable and durable2、Double operating position design,Easy to operate, higher efficiency
1)diameter of Grinding disc: Dia500mm
2)Scope of Grinding:Dia25-Dia300mm
3)Quantity of grinding disc:2 pcs
4)Application : valve core of plane globe valve, gate valve .
5) Motor Power:1100W,Double motor.
6)Speed regulation mode:Variable frequency stepless speed regulation
7)Power supply: 220 V/50Hz
8) motor power: 1100W x2=2.2kw double motor
1．Connect the 380V power supply and turn on the total power supply.
2．Before starting the equipment, check whether there is any foreign body around the grinding disc and deal with it.
(1) Device startup key: RUN Device stop key: STOP Forward and Reverse conversion key: JOG
(Note: when the forward and reverse conversion is done, the position of the triple lever should be adjusted accordingly).
Speed adjustment: knob on the panel rotation adjustment or up and down key adjustment.
(2) Other key suggestions should not be adjusted so as to avoid confusion.
(1) Before grinding the spool, adjust and fix the triple lever according to the size of the spool, and install the roller assembly on the triple lever, adjust the position and press firmly. Apply the corresponding abrasive grout on the grinding plate. (see grinding process)
(2) Grinding and repair of round spool.
The spool is placed in the middle of the angle between the three retaining bars and contacts with the roller to start the equipment for grinding. Or put the spool roller between the angle of the triple bar and contact with the roller, put one or more spools into the roller, start the equipment for grinding.
(3) Grinding of Gate valve spool:
Place the spool roller between the angle of the triple lever and contact the roller. Place one or more spools in the roller and start grinding.
(4) Hand held grinding:
The small spool with less damage will put the spool on the grinding disc, and start the equipment to carry out grinding by hand.
(5) the left and right two lapping plates are controlled by two transducers on the left side and the right side respectively, and the operation mode is the same.
The abrasive paste with different sizes should be replaced according to different grinding needs. The abrasive paste is stirred and coated on the abrasive plate with machine oil. Before grinding, the high point burr on the spool should be removed before grinding.
1)Rough grinding:
Choose 60 -120# abrasive paste to remove defects such as groove marks, pits, scratches, etc.
2).Fine grinding:
Grinding around 240# or so is used to remove minor scratches.
3). Finish grinding:
More than 400 #grinding paste is used to finish the polishing.
Valve Polishing Machine, Stationary Valve Core Grinding Machine, Gate Valve Grinder Factory
Hot Sale Various High Quality Valve Grinder, Valve Test Bench, Pipe Beveling & Cutting Machine. The portable & Stationary Valve Grinding Machineis suitable for Gate Valve, Globe Valve, Safety Valve. As fames China Valve Seat grinded Machine, High quality and factory price will give you.
在线联系供应商
Other supplier products
 |
MT-600 Stationary Valve Grinding Machine | MT-600 Stationary Valve Grinding Machine Stationary valve grinding machine is suitable for the relief valve off site repairing, widely applied in ... |
 |
MT-800X Stationary Valve Core Grinding Machine | MT-800X Stationary Valve Core Grinding Machine Stationary valve grinding machine is suitable for the valve disks of gate valves and globe valves,i... |
 |
MT-500X/2 Stationary Valve Grinding Machine | MT-500X/2 Stationary Valve Grinding Machine is suitable for the valve disks of gate valves and globe valves,it is widely applied in coal-fired powe... |
 |
MJ-400 Portable Globe Valves Grinding Machine | MJ-400 Portable Globe Valves Grinding Machine 1)grinding diameter: Dia118-Dia450mm 2)used for valve seat of plane globe valve,valve seat of safety... |
 |
DN80-250mm 3"-10" MJ250 Portable Relief Valve Grinding Machine Portable Valve Grinding and Lapping Machine For Safety Valves Portable Valve Grinding and Lapping Machine | Portable Valve Grinding and Lapping Machine For Safety Valves Portable Globe Valve Grinding MachineSummarization MJ-250 Portable Valve Grinding M... |
Same products
 |
用于PCD工具磨削的11A2金刚石砂轮 | 卖方: 河南省磨澳超硬材料 | 用于PCD的金刚砂轮的应用特别适用于PCD/PCBN工具的粗磨、中磨、半精磨和精磨、修磨、刃磨。 PCD金刚石砂轮的优点* 精确控制几何公差* 金刚石颗粒的附着力强，使用寿命极长* 良好的自磨... |
 |
玻璃用树脂砂轮 | 卖方: 河南省磨澳超硬材料 | 树脂砂轮的适用机器 玻璃直边机、玻璃双边机、斜边机（如Deway、ZXM、BOTTERO、BAVELLONI、Bovone、Schiatti Angelo和Glassline）。 树脂金刚石砂... |
 |
Dental milling burs | 卖方: 金锐（广东）新材料有限公司 | Product Advantages: Good wear resistance. 2. Complete product range, suitable for all kinds of... |
 |
树脂结合剂金刚石切割轮 | 卖方: 河南磨澳超硬材料有限公司 | 树脂结合剂金刚石切割轮(切割刀片)具有垂直损耗的特点，能有效地减少晶粒变形的发生，提高硬脆材料的切割质量和效率。 树脂结合剂金刚石砂轮的特点 *提高切割质量和效率 *切屑自由切割，切割速度更快 ... |
 |
Horizontal Type SYTW600/5-32 Top Pressure Valve Test Bench， Horizontal Type Valve Pressure Test Bench ，Valve Pressure Test Bench | 卖方: 保定市信必成进出口贸易有限公司 | Horizontal TypeValvePressure Test Bench 1) Applicable to gate valve,globe valve,ball valve,Che... |
